• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Masters of RAID Help!

J

Jonjolt

[H]ard|Gawd
Joined
Jan 6, 2002
Messages
1,514
I spent hours searching through this forum and google I can't come up with anything

I got 2x Maxtor 300GB Drives (w/ 16mb cache, ncq, mhx[some proprietary bullcrap I guess]) and an Asus A8N-SLI.

I want to make a RAID 0 array but, what is the reccomended strip size for all around power use? The reason I ask is because NCQ is fairly new to ATA drives and I can't find any comparisons and I want to know if this has any effect ie: strip sizes more likely used for scsi drives. One more thing there are two sata controllers. The Silicon Image 3114R RAID controller and the nForce 4, I'm assuming maybe the Silicon Image controller runs more independently (hogs less CPU cycles) resulting in more speed. Is this true?
 
Jonjolt said:
I spent hours searching through this forum and google I can't come up with anything

I got 2x Maxtor 300GB Drives (w/ 16mb cache, ncq, mhx[some proprietary bullcrap I guess]) and an Asus A8N-SLI.

I want to make a RAID 0 array but, what is the reccomended strip size for all around power use? The reason I ask is because NCQ is fairly new to ATA drives and I can't find any comparisons and I want to know if this has any effect ie: strip sizes more likely used for scsi drives. One more thing there are two sata controllers. The Silicon Image 3114R RAID controller and the nForce 4, I'm assuming maybe the Silicon Image controller runs more independently (hogs less CPU cycles) resulting in more speed. Is this true?
Click to expand...


Lower is suggested for games, higher is suggested for image and cad work.
 
I think I have the sicilicon image controller on my epox 4pda2+. I kindof tried to get my maxtors to work, but I think I'm messing something up somewhere with drivers perhaps. Not too woried about it, just wondering what drivers you used for yours
 
You must log in or register to reply here.
Back
Top