M4A89GTD PRO - freezing / reset issues

Kainzo

Gawd
Joined
Nov 12, 2009
Messages
972
My mother board has been having some serious freezing issues - heres my system specs (which may be different from my signature - its a new rig)
HAF 942 (case)
AMD 1090T AM3
8gb DDR3 ram (1600 - though the bios reads it at 1333 or 1247 in turbo mode)
Noctua ND-14 CPU cooler
GTX 480
1TB HDD Black Cavier 64mb cache

misc info
the USB cables are not plugged into the 1394 port .. standoffs - are on... Its grounding out somewhere.... And on a side note - after I installed my new Noctua cooler - every other computer restart gives me the message that "NEW CPU INSTALLED" I tried changing the battery - I've reseated the CPU probably 4 times (including new paste each time) - I'm at a loss of words to that one as well.

Can someone please help with this? I just dont know where to go from here.
 
I know its quite the bizarre issue - at the moment im currently redoing my entire set up - rescrewing the motherboard down etc - if you have any tips feel free to shoot 'em my way.
 
I've got similar problems with 2 the same motherboard that where sold to our client.the problem was constantly and very similar to yours. I reinstalled OS, flashed bios to new version run memtest overnight, prime95 also was tested and it was stable so it didn't resolve the problem. I also had problem with "New cpu installed" on both boards. Finally i sent both to RMA just today and i hope that asus resolve the problem.
 
Pull the motherboard out and sit it on some cardboard and see if it functions right.Just use basic components;one stick of ram,video card and processor.
 
K - I'm bare boning it at the moment - I do still have the Noctua cpucooler on .. it is freezing upon choosingthe bios... Can anyone tell me the latest revsiion of this board?
 
I know its not plugged in securely - im getting the message "CPU fan error" but the fans are moving on the cpu - and despite me completely removing my windows OS hdd - its still overclocked to 3.7ghz (does not look likebios is staying reset)
 
Okay, fan error was due to heat sink fan not being plugged into the heat sink. I am still getting massive freezes with bare boned - no gpu / ram - no OC. I am also noticing that whenever i reset the cmos battery - it reverts the cpu to 3.7ghz and dcs the ram
 
I've had the same problem (and I started a thread about it) and unfortunately no matter which case I put it in, this grounding issue is the same. Anytime you tried to plug in a USB device but as soon as it touches the ground on the front USB port(s), the PC froze or reboot. I ended up selling it to another user and I told him about the problem. Strange, but he got the board but does not have the same problem. Everything works fine for him, no freeze, no reboot. It's strange as I tried on two different PSUs and on two different cases, same problem. It's good my buyer doesn't have this problem. I just told him the board just hates me and wants a new owner.
 
I have the same MB whit a 955BE 8 gb ram and I have been though 2 bords the frist one died about 2 weeks after I got it and it never could clock my cpu over 3.6 no mater the v core. the 2nd one had a bad ram slot. and this one when ever I tun off the power I have I tun power off tun back on let sit for a mim then turn psu back off then back on and it says over clock faled no mater if stock or waht ram I ues once boted up its rock soid though
 
im not experiencing a grounding issue at the moment - I know what that does - but this is a HARD FREEZE issue. Not an overclocking error etc.
 
An update:

It turns out the 'random' reboots when plugging in a USB is related to the mobo - it is a design flaw and there are hundreds of other users experiencing the same issue with this motherboard. However, I have resolved that by unplugging the entire usb/etc lines from the front of the case (I dont care about using them if theres a chance of reset) there seems to be another issue happening now. First, ill say that when I was turning my entire case upright (While powered on) - it randomly shut off. Big deal right? WRONG. The entire PSU just died at that point. 6 hours later, I come back with a brand spanking new PSU. It is still freezing and having issues.

Backstory:
None of this was happening before I installed the Noctua D14 cooler. I think this is causing the issues with the freezing - its apparent to me that the cooler is far too heavy for the actual motherboard - despite it being installed properly. I think the weight of the cooler is causing the motherboard (or cpu) to bend or become unseated thus causing the issue.

I have had the case on its side for 6 hours and it didnt happen - when turning it up right, it happened within 10-20mins.
 
It may look a little ghetto, but try using some tie wraps (zip ties, or whatever you call them) daisy chained up to the top of the case to relieve the stress off of the board caused by the cpu cooler and see if that stops the freezing.

I own this board and haven't had any issues, granted I used the stock cooler and now am using a water cooling block.
 
No, the pressure of the heatsink doesn't have anything to do with this freezing problem on this board. I was using the stock heatsink, which is very light and I had it. After reading many posts regarding the freezing problem on this board, I am sure it's a design flaw although I didn't actually state it. The person that bought mine isn't experiencing this freezing problem, so I am puzzled.
 
I've got the same board and have the same issue though to a bit worse extent for the past year that I have owned it. Constant BSODs of various types, garbled screens and system lock ups before resetting itself. I read that its an incompatibility in the memory im using, though your not using the same so I doubt its exactly the same. I'm usually a big fan of ASUS parts but I think this motherboard is crap. Im just waiting a bit for Sandy Bridge to improve and possibly their next part to come out so i can get away from board.

BTW, increasing my memory voltage from auto/1.5v to 1.65 greatly reduced the number of BSODs and lockups I was experiancing. When I had them set to 1.5v it would steadily lockup after about 15-20minutes in BFBC2, long idles at the desktop, or even just launching any old application. Boosting it to 1.6v reduced it further but it still occured rather frequently...guess around 15 times a day. At 1.65v it will happen about 1-2 times a day. Maybe something to checkout with your memory.
 
Here's an interesting update!

I took my computer completely apart. I unscrewed the motherboard - I got new stoppers/etc, I unhooked myheatsink and I cleaned off the paste on both.

I reput in the backplate - ensuring it was tightly pressed against the motherboard - I used the Noctua fan kit to ensure everything was firmed attached. At this point while the board was out of the case I attached the cpu and the heatsink.

I think bareboned the build - with the Noctua cooler - no errors/freezing. So I started screwing the motherboard to the case/chasis - After lightly screwing in each screw with the paper/rubber stoppers - I realized that it may be a grounding issue. I attempted to power on the board with all screwed VERY lightly secured, It would not POST - I unscrewed the top left screw and attempted the post again - It posted. At this point I knew it was a grounding issue.

I ensured that all the screws on the mobo were secured - I left the case its on its side so the weight of the heatsink had no bearing on the cpu (if this were it) - it ran for 12+ hours with no freezes.

I then sat the case upright - tested for a POST - GREAT! it worked at that point... HOWEVER - 20 mins into playing a game (or just sitting at desktop it happened 2+ times) It froze. On the LAST freeze - it would not post after trying to turn it back on. I believe it has to do with the weight of the Heatsink for the CPU - causing the screwed to slip and perhaps ground out the mobo. The screwed arent hard on the board - they are firmly enough where I wouldnt be able to ground it myself by tugging or pulling.

I believe this is an issue with perhaps this board or the mismatch compatibility with the heatsink.

My next steps are 1) RMA the board or 2) RMA the heatsink or 3) Play happily with the case on its side (I dont want to this) - has anyone else have a suggestion for me to try to stop the grounding issues?
 
Don't mean to butt into your thread but google pointed me to you. I have the same issues and a similar build. HELP! Haha.

same mobo
same cpu
4x2GB OCZ DDR3-1333 (on the QVL)
Sapphire Radeon 6950 2GB
Crucial SATA III 64GB SSD
2 SATA WD 320GB
1 PATA Seagate 250GB
Old as hell PATA NEC DVD-RW
Maybe the problem.. 550w PSU (ordered a new one [corsair CMPSU-750TX] today in an attempt to solidify my belief the problem is the mobo)

I'm running the stock heatsink/fan but temps are cool, currently 29*C even with that turbo core deal keeping my clock speeds ~3.5Ghz. I have that little spacer card in the first PCIe slot so the second runs at x16. Tried w/out the spacer as well with the video card in the first slot running at x8. Checked each RAM stick, memtest showed one to be faulty, currently running 2x2GB in dual channel till newegg sorts out the RMA. Changed the mem timings and voltage to spec (7-7-7-16@1.65v) the first time I went through post.

I've read about the grounding issue with the front USB ports and have pulled the cords to that, but it still randomly crashes. Really, pissing me the hell off... randomly. I cannot diagnose this problem. I can be balls deep in a stress test, running Fallout: NV on fuck me in the ass settings, and then open a word document and it locks.

I feel your pain man.... If this PSU from corsair doesn't fix it, I'm returning this mobo and buying another.
 
I'm also having the same issue with USB ports but even worst since it's happenning not only with the case usb's but also the onboard ones. Or maybe I should say I was having problem because 7 days agora I sent it to RMA.

Here's the setup:
Phenom II 955
GSkill 4Gb DDR3 1600
1 Samsung F3 500Gb
LC-Power 650W PSU

However the store keeps telling me they have tested it and haven't found any issue with the board.
And since I can't pinpoint what causes it it's going to be a very long process ...
 
Don't mean to butt into your thread but google pointed me to you. I have the same issues and a similar build. HELP! Haha.

same mobo
same cpu
4x2GB OCZ DDR3-1333 (on the QVL)
Sapphire Radeon 6950 2GB
Crucial SATA III 64GB SSD
2 SATA WD 320GB
1 PATA Seagate 250GB
Old as hell PATA NEC DVD-RW
Maybe the problem.. 550w PSU (ordered a new one [corsair CMPSU-750TX] today in an attempt to solidify my belief the problem is the mobo)

I'm running the stock heatsink/fan but temps are cool, currently 29*C even with that turbo core deal keeping my clock speeds ~3.5Ghz. I have that little spacer card in the first PCIe slot so the second runs at x16. Tried w/out the spacer as well with the video card in the first slot running at x8. Checked each RAM stick, memtest showed one to be faulty, currently running 2x2GB in dual channel till newegg sorts out the RMA. Changed the mem timings and voltage to spec (7-7-7-16@1.65v) the first time I went through post.

I've read about the grounding issue with the front USB ports and have pulled the cords to that, but it still randomly crashes. Really, pissing me the hell off... randomly. I cannot diagnose this problem. I can be balls deep in a stress test, running Fallout: NV on fuck me in the ass settings, and then open a word document and it locks.

I feel your pain man.... If this PSU from corsair doesn't fix it, I'm returning this mobo and buying another.

If you end up getting a new board, I can tell you that the Gigabyte GA-GPA890-UD3H has been a great board for me. The only issues I have had have been of my own doing. Another board is the MSI 890FXA-GD65. I haven't had this board but have heard good things and it has a great price. Hope you can get every thing worked out and don't have to go that route though.
 
Over 24 hours without a crash now... I was able to recreate the crashes! Everytime I tried to upload a picture to imgur it would freeze. Uninstalled my ralink wireless card and tried some different drivrs and everything seems to be working now. I'm going to give it another couple of days untl I plug to front USB ports back in, though.

Edit: for more info

The drivers I was using worked fine in my old system but must not have liked this new mobo. Had an asus A8V, opteron 180, 3 GB OCZ ram, radeon 3850, win7. Moved the card over and it started having issues.

Hope this helps anyone having these problems.
 
Last edited:
Back
Top