• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

M.2 and Sata 3 Docks

Comixbooks

Comixbooks

Fully [H]
Joined
Jun 7, 2008
Messages
26,287
They have these on Amazon and Walmart does anyone use these I already have a USB3 to Sata 3 SSD but don't have a M.2 Dock. Or are the transfers too slow or is it just a pain to use? I suppose you risk breaking the drive since they are pretty fragile .

Screenshot_20241228-092652.png
 
I have one piece of this style of dock.

It worked once and then on a disk change never again. I suspect that there is dust in the slot. Can't recommend.
 
I have one, and it works. The speed is going to be based off of your NVMe SSD, your USB port, and your M.2 dock. USB3.2 Gen2 is 10Gbps ÷ 8 = 1250MB/s. If you use USB 3.0, it's half that. if you use USB 3.2 Gen2x2, that's 20Gbps, but you'll need a port with that (like the ASUS Z690-P WiFi D4), and a M.2 dock that supports 20Gbps (as well as a NVMe SSD that can reach speeds of 2500MB/s).

USB 4.0 is 40Gbps
USB 4.0 Gen2 is 80Gbps
USB 5.0 will also be 80Gbps
 
You must log in or register to reply here.
Back
Top