LTO Used tapes + data write verification / tape integrity verification

danyal711

Limp Gawd
Joined
Jul 9, 2004
Messages
205
I recently purchased an LTO drive and am buying misc LTO tapes. Some are new, some are used. What is the word on used LTO tapes? Also, what is the best way to verify that the tapes will hold data and that the data written to them is correct? For my use, I will only be writing to each tape once and then storing in case one of my HDs dies, in which case I will use it to restore.

Side question, how do you know when you need to clean the tape drive with a cleaning tape?

Thanks in advance!
 
I'll have to double check on the cleaning tape. As far as used tapes go - I'm not sure if there is a way to determine how much use they have really had. In your backup software though - just enable write verify. Then it will double check that whats it's written to the tape is correct by reading it back. My IBM LTO autoloader tells me when to clean the drive on the front LCD - when I first got it (used) I went ahead and ran a cleaning tape. In the past year I think it's asked me to clean it once.
 
Ditto. I buy used tapes off eBay all the time. First thing I do is a long erase on them, and always use verify when I do backups. Makes the backup take forever, but I just queue it up and start when I go to bed, then in the morning it's all good to go.

So far I've gone through 10 LTO2 tapes and only had a problem with one. Ironically, the one that failed was my backup I ran last night. I just ordered another 8, have to see how they go.
 
Side question, how do you know when you need to clean the tape drive with a cleaning tape?

Most tape drives will tell you when they need cleaning (often from a light on the front of the drive). Some autoloaders also have the feature to clean the tape automatically when needed.

Just clean it whenever it wants it; you're not supposed to clean the drive unnecessarily.
 
Back
Top