Low performance after setting the paging file

Chapapa07

n00b
Joined
Mar 20, 2012
Messages
62
2 days ago I set the paging file to "system managed size" (yes I dissabled it months ago) in order to see if the paging file would give some fps. After setting it to "system managed size" , on battlefield 3 I get on average 19 fps and I used to gt 41 on high, at 1280x1024, I set the paging file again to " no paging file" but nothing happened. I also get very similar results in crysis 2 .

Before 3d mark vantage gpu score was about 10400 and now is about 2600 ( it didnt even reached 3000), the cpu score is intact.

My specs:

Core 2 quad q8300 2.5
GTX 550 ti oc
4 gb ddr2 800
Windows 7 64 bit
Max resolution 1280x1024.

No idea whats happening
 
make sure to reboot after any of the changes and check again. Also for the heck of it, set the paging file to 2x the amount of ram you have and make sure you have the hard drive space free to match it. See what happens when you turn it off, reboot and run games. Then turn it on with 8gbs of paging space, reboot and try again.

I personally don't run any paging on my boxes as I see no performance gain from it, especially since I use SSD's for my games and OS

Hope that helps, let us know how it goes
 
I always reboot after any change of the paging file, the system sets it to 4095 mb, I thought " well the system knows best". I have 94 gb free.

Ok, I will set it to 8 gb.
 
welp then something else effected it. highly doubt changing the page file would drop the frame rate.
 
Changing the pagefile settings alone wouldn't cause that. Something else must have changed on your system.
 
I already said I did that in the first post.

Yes, you said you did that months ago, and 2 days ago you set it to system managed and now are having issues. If by that you meant you've already attempted that as a solution to your 2 day old problem, it was poorly written.
 
Yes, you said you did that months ago, and 2 days ago you set it to system managed and now are having issues. If by that you meant you've already attempted that as a solution to your 2 day old problem, it was poorly written.

Sorry for the misunderstanding , english is not my first language.
 
I installed msi afterbunner in order to see if the problem is that every time I run a game, the gpu goes to 2d mode.

I set Afterbunner to show me gpu usage and speed, I ran crysis 2 on extreme at 1280x1024 and it showed that gpu usage was 100 % and the speed was 950 ( the maximum).

I ran out of ideas, guys plz help me.
 
Page file wouldn't cause those kind of performance issues, I'd expect to see at most some hard drive thrashing as assets are swapped about causing some temporary drop in frame rate, no a large constant drop you're seeing.

Whatever the cause of the performance issues it's most likely coincidental with the pagefile changes. You definitely want to graph CPU/GPU/memory usage to see what is occuring during the low performance, see if you have any hardware throttling, not loading 100%, or if any other processes are causing problems.

Make sure to check video settings that no driver enforced vsync has been turned on, or something like that.
 
Make sure to check video settings that no driver enforced vsync has been turned on, or something like that.
That'd be my guess, though I'd expect vsync to drop the GPU load a bit below 100% - seems more likely that it's forcing some stupid amount of AA or something.

Yes, you said you did that months ago, and 2 days ago you set it to system managed and now are having issues. If by that you meant you've already attempted that as a solution to your 2 day old problem, it was poorly written.
OP did clearly say that it was set back to "no paging file"...
 
Page file wouldn't cause those kind of performance issues, I'd expect to see at most some hard drive thrashing as assets are swapped about causing some temporary drop in frame rate, no a large constant drop you're seeing.

Whatever the cause of the performance issues it's most likely coincidental with the pagefile changes. You definitely want to graph CPU/GPU/memory usage to see what is occuring during the low performance, see if you have any hardware throttling, not loading 100%, or if any other processes are causing problems.

Make sure to check video settings that no driver enforced vsync has been turned on, or something like that.

As I said, I ran 3d mark vantage and the gpu score decreased exponentially from 10,000 to 3000 while the cpu score remained intact, I also ran crysis 2 with msi afterbunner, it showed me that the gpu usage and mhz speed are 100 % ....with crappy fps.

I went to nvidia control panel and clicked on Restore default setttings, it did nothing :(

That'd be my guess, though I'd expect vsync to drop the GPU load a bit below 100% - seems more likely that it's forcing some stupid amount of AA or something.

Crysis 2 is set on extreme and battlefield 3 is set on high at 1280x1024 , the same setting that I ve been using for 6 months

Btw, now every time I turn on my pc, it does boot 50 seconds later, meaning that in those 50 seconds there is cero cpu activity, so I think my hard drive disk maybe the problem.
 
I thought my hdd was the culprit, I bought a WD caviar black 1002faexx and replace my old hdd , installed windows and everything but it didnt solve anything ...... now my problems are worst:

My pc doesnt boot up right after I turn it on, I have to press the reset button and 15 seconds later my system boots up (it used to happen with the seagate hdd).

Before 3d mark vantage gpu score was around 10400 and now is around 2600 ( it didnt even reached 3000), the cpu score is intact.

And slow performance in all my games (I had this when my problem started).

Gpu and cpu temperature are not the problem, the gpu max temperature is 59 c and my cpu temperature is 72 c.

I cleared the CMOS first via the jumper switch, I changed my hdd s sata cable 3 times, without results.
 
I thought my hdd was the culprit, I bought a WD caviar black 1002faexx and replace my old hdd , installed windows and everything but it didnt solve anything ...... now my problems are worst:

My pc doesnt boot up right after I turn it on, I have to press the reset button and 15 seconds later my system boots up (it used to happen with the seagate hdd).

Before 3d mark vantage gpu score was around 10400 and now is around 2600 ( it didnt even reached 3000), the cpu score is intact.

And slow performance in all my games (I had this when my problem started).

Gpu and cpu temperature are not the problem, the gpu max temperature is 59 c and my cpu temperature is 72 c.

I cleared the CMOS first via the jumper switch, I changed my hdd s sata cable 3 times, without results.

That's pretty hot for a CPU....You sure nothing is wrong with it/the heatsink/fan?
 
As others have said, this is likely another issue but about the paging file, I've read that it should be 1.5 times the size of your RAM and that setting it at a fixed file size is best although I'm not sure if that's still relevant or true.

4096MB RAM, paging file set to 'Min 6144 - Max 6144' and Windows will keep it that size.
 
He reset his BIOS. I bet his memory speed settings are screwed, Sata may be set back to 1 by default (Some BIOS require you to change it back up to 2, or 3). Hardware raid could be enabled, any number of things. But I agree, this has nothing to do with paging files.
 
As others have said, this is likely another issue but about the paging file, I've read that it should be 1.5 times the size of your RAM and that setting it at a fixed file size is best although I'm not sure if that's still relevant or true.

4096MB RAM, paging file set to 'Min 6144 - Max 6144' and Windows will keep it that size.

In the old days of Win32, yes. Nowadays, just leave it on system managed. Not like the page file is going to do much swapping on Win64 if you have 8GB or more installed anyway (at least until 64-bit apps start using more then 2GB each...)

Based on prior posts, it sounds like the GPU is going back into 2D mode. Odd to say the least.
 
Back
Top