Low Level Format with no floppy drive in the system.

DKTVPN

Weaksauce
Joined
Jun 20, 2004
Messages
72
How can I perform Low Level Format from a system, laptop or desktop, with no floppy drive? Is it doable with USB Floppy drive?
 
DKTVPN said:
How can I perform Low Level Format from a system, laptop or desktop, with no floppy drive? Is it doable with USB Floppy drive?

low level formats cannot be done by consumers, they can only be done at the factory.

as for just a regular "write everything to zero's" formatting, id use a windows CD

as for booting from a USB flash drive, the Mobo has to support it, but it is doable
 
while you technically can do low-level formats

its just a bad idea ;)

writing zeros or a full format should be fine 99% of the time...
 
So I guess it's writting zeros to drive. How to use with Windows CD?

I did use Win XP Pro to try zeros to drive with Win XP Home on it but have no choice of writting zeros to drive, just format the whole drive. I checked the drive's manufacture and they need to put it on a floppy.

How to know my mobos are supporting USB floppy booting?
 
If you look in your BIOS, under boot order, there may be an option for "boot other devices", this will usually allow USB drives if enabled. Also, this take me back, but my old Award bios would let me do low level formats straight from the bios (though this was in a 7 year old 166, and none of my current systems have this feature).
 
DKTVPN said:
So I guess it's writting zeros to drive. How to use with Windows CD?

I did use Win XP Pro to try zeros to drive with Win XP Home on it but have no choice of writting zeros to drive, just format the whole drive. I checked the drive's manufacture and they need to put it on a floppy.

How to know my mobos are supporting USB floppy booting?

uh.. you cant just format part of the disk, you gotta do the whole disk.
 
lithium726 said:
uh.. you cant just format part of the disk, you gotta do the whole disk.

not true, if you have an 80GB drive, but only create a 20GB partition, you can format just that 20GB section.
 
lithium726 said:
uh.. you cant just format part of the disk, you gotta do the whole disk.

He's not saying he only wants to do part, he's saying there's no option for writing zeros, only for normal formatting. I believe if you just reformat it normally (not quick) it'll write zeros, but then again I'm not 100% sure because I've never done it (I use WD Lifeguard utility thing).
 
potroast said:
not true, if you have an 80GB drive, but only create a 20GB partition, you can format just that 20GB section.

....duh

this makes me believe he does NOT have seperate partitions, as he wants to "zero out" his OS without affecting his data. if he had seperate partitions, he would not have this problem.
I did use Win XP Pro to try zeros to drive with Win XP Home on it but have no choice of writting zeros to drive, just format the whole drive. I checked the drive's manufacture and they need to put it on a floppy.

He's not saying he only wants to do part, he's saying there's no option for writing zeros, only for normal formatting. I believe if you just reformat it normally (not quick) it'll write zeros, but then again I'm not 100% sure because I've never done it (I use WD Lifeguard utility thing).

absoulty true. quick format will write 0's to the MBR, and a full format will write 0's to the drive. (this is not the same as low level)

(though this was in a 7 year old 166, and none of my current systems have this feature).

exactly why i said i didnt think it was able to be done for years, im still waiting of FLECOM to clear up how exactly one does go about low leveling these days

So I guess it's writting zeros to drive. How to use with Windows CD?
just choose "format in FAT32" or "format in NTFS" without the "quick" after it. this will write zeros to the whole drive.

if your data and os are on the same LOGICAL PARTITION/DRIVE, there is no way to just wipe windows and keep your data, you have to do the whole thing
 
If I remember correctly, format the drive (not Quick) doesn't write zeros on it because when I format only I can install windows right after that, but if I write zeros I have to format one more time before I can run windows installation.
 
DKTVPN said:
If I remember correctly, format the drive (not Quick) doesn't write zeros on it because when I format only I can install windows right after that, but if I write zeros I have to format one more time before I can run windows installation.

are you talking about deleting a partition? if so, thats not writing zeros. its just taking away the logical layout of the disk

writing zeros means you are setting all the bits on the disk back to the "off" position, whereas they were any combination of 1s and 0s before to make up a data structure in binary. writing zeros erases all your data and makes the drive almost completly clean. i believe there is some kind of laser phooey that can get your data back off it, but unless the gov is after you, i dont see how that would be necessary.
 
FLECOM said:
while you technically can do low-level formats

its just a bad idea ;)

writing zeros or a full format should be fine 99% of the time...

not with any readily avaiable software, that is designed for a modern HDD
any antiqueware that would try to, would kill the HDD, the areal density, tolerances,
and integration of low level format structures to firmware (distributed servobursts)
is just past doing it outside of an environmentally controlled factory

some still call it low level formating however,
but that is just a misleading legacy term for consumers that dont know the difference
True low Level Formatting
Fake Low Level Format (Zero Fill)

DKTVPN said:
How can I perform Low Level Format from a system, laptop or desktop, with no floppy drive? Is it doable with USB Floppy drive?

Ultimate Boot CD (Freeware ISO)
would likely have the manufacturers diagnostic utility you need
if not use a single pass of DBAN or Autoclave

crazedmodder said:
He's not saying he only wants to do part, he's saying there's no option for writing zeros, only for normal formatting. I believe if you just reformat it normally (not quick) it'll write zeros, but then again I'm not 100% sure because I've never done it (I use WD Lifeguard utility thing).

formatting simply removes some of the metadata (breaks the chain of pointers)
it doesnt overwrite data, which is why its possible to recover data after a format
The difference between the regular format versus the quick format is whether or not
the volume is scanned for bad sectors using the chkdsk command.
 
Ice Czar said:
formatting simply removes some of the metadata (breaks the chain of pointers)
it doesnt overwrite data, which is why its possible to recover data after a format
The difference between the regular format versus the quick format is whether or not
the volume is scanned for bad sectors using the chkdsk command.

oh.. so THATS why it takes so damn long.. thanks for clearing that up ice czar
 
lithium726 said:
oh.. so THATS why it takes so damn long.. thanks for clearing that up ice czar

you want long
try initializing a large RAID 5 array :p

Happy to Help ;)
 
Ice Czar said:
you want long
try initializing a large RAID 5 array :p

Happy to Help ;)

hahahaha, i have no reason for RAID5.. yet... but i can imagine that a TB raid5 array would take damn near a day :p

anyway, i just checked out this..
Ultimate Boot CD (Freeware ISO)
would likely have the manufacturers diagnostic utility you need
if not use a single pass of DBAN or Autoclave

that looks like the absolute best damn tool for use on the job, no more searching around for diagnostics for *insert component here*
 
lithium726 said:
hahahaha, i have no reason for RAID5.. yet... but i can imagine that a TB raid5 array would take damn near a day :p
that's why raid controllers have the "quick init" function ;)
 
or at least most do
my SX6000 however does not :rolleyes:
it doesnt need a TB to take all day either :p
 
I just made a test. Take one 2G old Western Digital drive put in a system with floppy drive:

- Format the whole drive and it's ready to install Windows but stop, not to install Windows.
- Use Utilities from WD site to write zeros to drive, then I have to format the drive before I can install Windows.

So the conclusion is format only doesn't write zeros to drive, I think.
 
Back
Top