• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Loop Setup

Hardass

Hardass

[H]ard|Gawd
Joined
Jan 7, 2007
Messages
1,216
Alright looking for advice. I have a D5 Bay res combo installed. I also have a D5 and res setup in bottom of case. I have a 480 rad in bottom and a 360 in the top. Will be cooling the cpu and a 290x Lighting. I had planned to use bay res to 360 to cpu in 1 loop and 480 and D5 in bottom to cool 290x. Now would it be just as good or better to setup one loop?? From bayres to 360 then to cpu on to 290x to 480 to bottom D5-res to bay res??
Or just a single loop using one of the pump setups?
 
Single or double loop is typically an appearance preference. Performance wise a single or double loop will be pretty much on par with each other..... Personally I do a single loop (2 pumps in your case) for simplicity. Add to that, you have way more rad space than you need for a single CPU and single GPU. Unless your going passive ... but even then should be more than adequate.
 
Went single loop and removed the d5/bayres. Cooling just fine.:D
 
You must log in or register to reply here.
Back
Top