Looking for an answer to new pc build issue

trooper11

Limp Gawd
Joined
Feb 19, 2004
Messages
350
I am having some trouble getting a new pc I just finished building to output any display. Here are the specs:

Intel E8500
Intel DG965WH motherboard
2x 2GB Corsair XMS2 DDR2 800
DVDRW
BFG 8600GTS 256
Antec NSK4480 Case with 380W Eatherwatts PSU

The problem is that whenever I power it up, everything sounds normal and looks normal inside the case, but nothing comes up on the display. Ive tried it on an older 17" lcd and a larger LCD TV, but neither get any picture (trying to use either VGA or DVI). Im not ruling out the possibility that it doesnt like these monitors for some reason (the non standard res of my tv or the older specs of the monitor), but I cant try another monitor right now.

Ive tried pulling the video card and just going off the VGA built onboard, but still nothing. I also tried pulling the ram and just putting in a single 512mb DDR2 stick, but no change. I also went through the steps to reset the bios, but that didnt effect anything either. Any help you guys could suggest would be much appreciated. Thanks.
 
There is a good chance that the Intel DG965WH motherboard bios does not support 45nm cpu's.

Check the cpu compatibility chart for that board. If Intel does have bios support for the E8500, find a older 65nm cpu and use that to update your bios, then put the E8500 back in.

But you might have to settle for a older 65nm core2 cpu for that motherboard.
 
Good point, I dont see it listed on the compatible chart for this board. I could of sworn I saw it on an intel page before going with the cpu. But if that is the case, at least I know what I need to do.
 
Back
Top