Longevity? AM2+/AM3 vs 775?

pigwalk

[H]F Junkie
Joined
Dec 14, 2004
Messages
8,396
Got the ram and case, next will either be PSU or Mobo. Seems to me that the main dif between C2Q and Phenom is heat and power, speed is close enough, and price is close enough to be a non issue. What I'm worried about is longevity.

With i7 out is there going to be any life left for 775 at all? i7's socket is still way out there for me pricewise, and I already have 8gbs of ddr2 ready to go for the build.

What about AMD? Will any new cpu's be compatible with a AM2+/AM3 board? Thinking of this one here GIGABYTE GA-MA790X .

So which has the best outlook for upgrade path?
 
LGA775 is dead, you will not see any new processors for it. AM2+/AM3 is a long shot in my opinion. I have no heard of any new gen processors coming out for AM3.

Bulldozer is built from the ground up and will likely require a new socket. You're best chance will be a 32nm shrunk slightly improved Deneb core would be my bet, even that is still low though.

If there will be any new processors for the current AMD motherboards I'm almost certain it will only be the AM3 socket w/ DDR3. By the time the new processor would come out DDR3 will be mainstream so there would be little reason to bother with a AM2+ drop in.

LGA775 and AM2+/AM3 are just about tied in my opinion (with value and performance). If you want the slight chance of upgrading hop on the AM3 bandwagon, though that will go against the 8GB of DDR2 you have. Otherwise flip a coin.
 
If your worry about longevity then go with AMD.

LGA 775 will still hold out strong for the upcoming years but don't except anything new to come from it.
 
lga-775 is officially a dead socket.. intel released its last lga-775 processor about 2 months ago.. so unless you want to go nuts and buy an lga-1366 and i7.. am2+ or am3 boards are your best option.. if you have ddr2 ram then go with the am2+.. AMD has no plans to discontinue support for the am2+ socket..

there are a lot of board options out there.. ive heard of some issues with the gigabyte 790X.. personally id go with the 790GX.. its the same chipset but you have the onboard video as well.. so incase one of those fluke accidents happen with a video card(s) then you always have a back up with the onboard.. or if you want dual or quad pci-e x16/x16 or x16/x16/x16/x16 or x16/x8/x8/x16 or x16/x16/x8 slots the 790FX is the best option..

currently every am2 am2+ amd am3+ processor is supported on most or all am2+ boards..

heres a list of boards that atleast in my opinion i think are worth looking closer at.. (these are not in any order of which is best.. just a list of boards)
http://www.newegg.com/Product/Product.aspx?Item=N82E16813128384
http://www.newegg.com/Product/Product.aspx?Item=N82E16813138130
http://www.newegg.com/Product/Product.aspx?Item=N82E16813131361
http://www.newegg.com/Product/Product.aspx?Item=N82E16813136057

and the only nvidia chipset board thats even worth mentioning is:
http://www.newegg.com/Product/Product.aspx?Item=N82E16813131292 (but requires a bios flash through usb before you can boot into anything if you decide to use a phenom II processor)

that should atleast give you some idea whats worth looking for in a board..
 
Back
Top