Linksys Refurbished E4200 $110

hesitating between this or the asus rt-n16 for 65, someone help me ?

need to handle 6-8 devices wirelessly for a 4 bdrm apartments
 
WTH does "speed up to 300 + 450 Mbps" mean?
 
just picked one up, big improvement over my DIR-655. WRT is coming for this one too ;)
 
Refurb wireless... I will pass, have enough problems with new wireless.
 
just picked one up, big improvement over my DIR-655. WRT is coming for this one too ;)

What kind of improvements? I have a DIR-655 myself which has served me well, trying to figure out if an upgrade would be worth it.
 
What kind of improvements? I have a DIR-655 myself which has served me well, trying to figure out if an upgrade would be worth it.

I have internet outside in the backyard now... great connection inside the house where it was dropping before.
 
$160 bucks at MicroCenter so that isn't to bad. I really need to get a new router. I have a crappy Trend-Net in my basement that barely pushes a signal up into the rest of the house. Front yard is completely out of the question for my laptop...
 
WTH does "speed up to 300 + 450 Mbps" mean?

It means it has two antennas for the 2.4 GHz band and three antennas for the 5.0GHz band, so you get up to 300 on 2.4GHz and up to 450 on 5.0GHz (assuming you have a wireless NIC with 3 antennas). Google MIMO...

I got this router and the Intel Centrino Ultimate N 6300 wireless card
http://www.intel.com/content/www/us/en/wireless-products/centrino-ultimate-n-6300.html

The 5.0GHz band's range is terrible (never tried any other brand so I can't compare). I can't use 5.0GHz anywhere besides the room the router is in, the signal and speed degrade too quickly. So, the 450Mbps feature ended up worthless to me - I probably could have went with a cheaper router.

I had one issue when changing settings via the web gui - the wireless networks disappeared. I had to reset to default settings and then everything seemed OK again. It has been solid for two weeks now...

FYI - I payed 130 at newegg, I see it is back up to 160 now though.
 
What kinds if real world speeds do you see? Could it handle a full blue ray rip stream?
 
WTH does "speed up to 300 + 450 Mbps" mean?

What it means basically is "You're not going to get anywhere fucking close to these speeds even if you park your wireless device right next to an antenna, however we will give you better speeds than the so called 54Mbps g-class wireless"

(and what the guy said above).
 
What kinds if real world speeds do you see? Could it handle a full blue ray rip stream?

I don't have the best numbers right now but you can see how quickly the speed drops on the 5.0GHz band behind a wall. My file server is currently sitting on a 100mbps firewall (likely limiting), the new linksys is connected to the 100mbps firewall and my clients connect to the linksys (obviously). My crappy laptop is probably limiting as well (older 7200 rpm drive).

Laptop 2 feet from linksys, 2.4GHz: 8.5-9 MB/s
Laptop 2 feet, 5.0GHz: 9.5-10 MB/s

Laptop from couch ~ 5 yards, 2.4GHz: 8.5 MB/s
Laptop from couch, 5.0GHz: 9 MB/s

Upstairs, no walls ~ 10 yards, 2.4GHz: 8-8.5 MB/s
Upstairs, 5.0GHz: 8.5-9 MB/s
My desktop upstairs is 2.4GHz only, SSD: ~10-11 MB/s (100Mb firewall probably limiting here)

Upstairs room w/ wall ~ 20 yards, 2.4GHz: 7 MB/s
Upstairs room 5.0GHz: 4 MB/s


The linksys has a feature called channel bonding where it will use two adjacent channels and supposedly get better bandwidth. Your NIC must have this capability as well. My laptop NIC has the capability but I did not notice a difference in throughput at all.

Basically, the 5.0GHz band is pretty useless unless you are in the same room as the aceess point.
 
Excellent info thanks.

7MB/s is better than anything I have now. Might give thus a shot.
 
Excellent info thanks.

7MB/s is better than anything I have now. Might give thus a shot.

Make sure you have a NIC with two antennas (streams), if only one you would be limited to "up to 150mbps". At least that's my understanding of how it works.
 
Funny thing, I see no 450mbps adapters on the Cisco site
 
5Ghz gives you more speed wirelessly but you have to be close. 2.4GHz gives you much more range. Rename the SSIDs so you can connect to 5.0 or 2.4 depending on where you are. Otherwise you have no idea which band you are using... stupid Linksys, but for the common man I guess it leads to less confusion.

Outside in my backyard ~60-70 feet from the router through the house with 5Ghz and my netbook (has N card) I get about 4 MB/s, with 2.4Ghz I get 15MB/sec which is what my internet max is. My DIR-655 would get less than 1MB/sec and usually drop out there. So the 2.4Ghz is definitely a lot more powerful than that of my DIR-655.

Also, the latest firmware reportedly caused less range and lower speeds. I'm not using the latest one but the one before it and have had no drops and great speeds even on the wired PCs using Gigabit.
 
Back
Top