• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

lil bios help

E

ex247

Limp Gawd
Joined
Aug 1, 2003
Messages
206
(btw i hate titles)

so i got a Asus P4P800-Deluxe, P4 2.4C and some Corsair XMS PC3200 DDR400 ram...

now im getting a problem. i know my 1st problem is using their "OC by %" feature in the bios, but thats all i can figure out to do. i can manually set things, but i dont really know what to set and where.

i know i can change my ram timings to 2 3 3 7 (there is no option for 6) but i dont know how to clock the processor higher. any help would be great.

the only reason i ask this now, is, im at "20%" now (2.4ghz @ 2.9ghz) but when i go to set it to "30%" it wont post. i wanna break the 3ghz mark, but i dont know if its a problem with the settings or my hardware.

thx
 
I'm not sure about that mobo but you might have to raise the voltage to your CPU or if there is a CPU/RAM ratio option you might want to try to change it to 5:4. I run an abit IS7-G with a P4 2.4C and changed the ratio to 5:4 to get mine to 3GHz.
 
ok...

im lookin @ my bios, set my ram to 2 3 3 6 4 (i dont know what the difference would be between 4 and 8, its the DRAM Burst Length) and the FSB:DRAM is @ 3:2, i dont know how to change that either

and i have these settings:
CPU External Frequency in MHZ that i can set between 100-400 (i think i want 250)
DRAM Frequency (can be set to 266,320,400) i am assuming i want 400 cuz thats what my ram is
AGP/PCI Frequency in mhz can be set to 66.66/33.33, 72.73/36.36, 80.00/40.00 (i have no idea on that one)
CPU VCore Voltage (too many to list but if someone shoots me over what i think it should be)
DDR Refrerence Voltage can be @ 2.85, 2.75, 2.65, & 2.55v (dont know on tha one)
AGP VDDR Voltage can be @ 1.80, 1.70, 1.60, 1.50v

im kinda stuck becuase i dont really deffinatly know what to set em at
 
You must log in or register to reply here.
Back
Top