screwloose45
n00b
- Joined
- Mar 17, 2007
- Messages
- 30
Two days ago there were massive thunder and lightning storms where I'm located, West Palm Beach, Florida. My computer was plugged in and running during these storms, only 'protected' by a $3 dollar power strip. Ten minutes into the storm the power to my house goes out, taking down my computer with it (no UPS). Once the storm is over, and power was restored I press the power button on my computer and get nothing, my monitor receives no input. Everything seems to be running fine...If you're looking at things from the inside of the case--HDD's spin, CPU cooler, case fans, GFX card coolers; all spinning. All the LED's are fine too; PSU, sound card, CPU cooler, case LED's; all lit up. All USB devices function normally.
I first thought the video card had been fried, so I try running my computer with two other GFX cards (clearing CMOS each time); a XFX 6800GS (in both PCI-E slots) and a PCI ATI 9250. I get nothing--Monitor receives no input. I then installed the video card which was in my computer at the time of the storm (video card #1) into a working a computer--And got nothing, monitor receives no input...But, the 'working computer' (computer #2) only has a 300W PSU, about the amount of power 'video card #1' requires to operate alone.
I'm stumped...Have no clue what is working, and what isn't. I will reward anyone who can provide me with information on how I can determine what is fried, with a small amount of money via PayPal.
Thank you.
Specifications:
AMD X2 AM2 4200+
2GB CORSAIR XMS2 DDR2 800
BFG 7950 GX2
ASUS MSN-SLI Deluxe
OCZ 600W PSU
Razer Barracuda Sound Card
250GB SATA HDD
80GB IDE with SATA Converter
I first thought the video card had been fried, so I try running my computer with two other GFX cards (clearing CMOS each time); a XFX 6800GS (in both PCI-E slots) and a PCI ATI 9250. I get nothing--Monitor receives no input. I then installed the video card which was in my computer at the time of the storm (video card #1) into a working a computer--And got nothing, monitor receives no input...But, the 'working computer' (computer #2) only has a 300W PSU, about the amount of power 'video card #1' requires to operate alone.
I'm stumped...Have no clue what is working, and what isn't. I will reward anyone who can provide me with information on how I can determine what is fried, with a small amount of money via PayPal.
Thank you.
Specifications:
AMD X2 AM2 4200+
2GB CORSAIR XMS2 DDR2 800
BFG 7950 GX2
ASUS MSN-SLI Deluxe
OCZ 600W PSU
Razer Barracuda Sound Card
250GB SATA HDD
80GB IDE with SATA Converter