• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Lian-Li PC-6X Question..

H

Hexus0

Gawd
Joined
Feb 28, 2005
Messages
590
Hey everyone, I'm looking to drill/cut a hole into the top of my case near the PSU (to route the cables from the back) and was wondering what is the most preferable tool to use? (I've never done any kind of case moding before)
 
I used a drill to drill small holes into an outline of the big wiring hole, then I used a dremel w/ cutting disk to connect the dots. After that, all that remains is to file down the jagged/sharp edges. This mod seems almost necessary for a clean wiring job in Lian-Li's.

lian_li_hole.jpg
 
I have a superflower case that's similar to pc-65

I cut a hole in the back panel above the motherboard tray with a "hole saw"

You can get one from Home Depot or Lowes for maybe 5 bucks.
 
You must log in or register to reply here.
Back
Top