Lasers Replacing Spark Plugs

HardOCP News

[H] News
Joined
Dec 31, 1969
Messages
0
The idea of lasers replacing spark plugs in my car is intriguing. Supposedly lasers are more efficient, give you better combustion and more power. I wonder if they can make a system to be used on older cars. Hmmmm.

In the new system the spark plug is replaced by a laser powered by the car battery which is sent along thin optical fibres into the engine's cylinders where lenses focus the beam into an intense pinprick of light. When fuel is injected into the engine, the laser is fired, producing enough heat to ignite the fuel and power the engine.
 
makes sense. It's got to be a hell of a lot easier adjusting some tables in the engine software than pulling the plugs and gapping them for a particular application.

I wonder how durable this system would be
 
makes sense. It's got to be a hell of a lot easier adjusting some tables in the engine software than pulling the plugs and gapping them for a particular application.

I wonder how durable this system would be

You're name is Dr. Stevil and you didn't make a joke about the freakin' laser beams? :p

Guess I gotta be the one to do it!
 
hahaha I honestly thought about it :D

dr-evil.jpg
 
"You know, I have one simple request. And that is to have engines with frickin' laser beams attached to their (cylinder) heads!"
 
The concept sounds ideal, but the reality of how to make that system work is mind boggling. How do you guarantee that the lenses or laser output stays clean so there is a perfect focus point? It's got to be as reliable or better than we can currently get from a traditional spark plug. If it can't potentially go up to 100k miles without touching it then it's not a replacement.

Plasma ignition systems are pretty darn cool. Some aircraft use them but they still produce a conventional spark.
 
The concept sounds ideal, but the reality of how to make that system work is mind boggling. How do you guarantee that the lenses or laser output stays clean so there is a perfect focus point? It's got to be as reliable or better than we can currently get from a traditional spark plug. If it can't potentially go up to 100k miles without touching it then it's not a replacement.

Plasma ignition systems are pretty darn cool. Some aircraft use them but they still produce a conventional spark.

Dude you better get this information to the engineers at Ford, I doubt they have thought about this.
 
Guess you would just have one central expensive laser unit and route it out to the cylinders via fiber optic.

Did anyone consider the weaponization implications? if there were fired into another car the driver would be instantly blinded... probably permanently.
 
makes sense. It's got to be a hell of a lot easier adjusting some tables in the engine software than pulling the plugs and gapping them for a particular application.

I wonder how durable this system would be

keep in mind that we can produce industrial grade gems that are far harder and more durable than any metal known to man, IG diamonds could be made clear enough and small enought, its just a matter of shaping them correctly to make the focal point, (call it the ignitor) and as such, the ignitor will probably never have to be replaced, the question is what are they doing it terms of the lazer to make it road worthy (i have had inexpensive red lazers blow out from setting them down to hard), and it sounds like they are trying to use fiber optics (instead of spark plug cables) which do not like tight radious's, heat or vibration, not saying it cant be done, just that it might be better implemented like todays moddern coil on plug desgine
 
Now we are one step closer to building our very own Autobot... hahaha

And they will come with frickin´ laser beams attached to their heads! Mwahahahaha
 
I am a car guy and I don't think this is gonna work, even with a direct injection system as previous posters have implied there are a ton of factors in an engine bay. Vibration, heat, cleanliness...I dunno, but then again I am not an engineer.

Perhaps designing the engine to run on this is a more practical approach but retro fitting..just give me an MSD system and some NGK's
 
keep in mind that we can produce industrial grade gems that are far harder and more durable than any metal known to man, IG diamonds could be made clear enough and small enought, its just a matter of shaping them correctly to make the focal point, (call it the ignitor) and as such, the ignitor will probably never have to be replaced, the question is what are they doing it terms of the lazer to make it road worthy (i have had inexpensive red lazers blow out from setting them down to hard), and it sounds like they are trying to use fiber optics (instead of spark plug cables) which do not like tight radious's, heat or vibration, not saying it cant be done, just that it might be better implemented like todays moddern coil on plug desgine

Exactly what I was thinking. Fiber optics are not good for this application.
 
Did anyone consider the weaponization implications? if there were fired into another car the driver would be instantly blinded... probably permanently.

Anyone smart enough to modify their car's engine so that a laser beam can leave the engine bay and hit a driver in the eye could probably just remove the IR filters from a laser pointer and hold the damn thing. Seriously, the laser in a CD-RW drive can blind you, it isn't hard.
 
I'm assuming they have already packages the laser and lens assemblies into a durable ceramic framework like current spark plugs sit in now. If that's the case, then the lens assembly has coatings on it that can withstand that type of heat and keep the laser focused on the ignition point. This sounds great and I'd love to see it come to the states. If it translates to more power, better efficiency, more MPG, then you bet people will go for this.
 
I'm assuming they have already packages the laser and lens assemblies into a durable ceramic framework like current spark plugs sit in now. If that's the case, then the lens assembly has coatings on it that can withstand that type of heat and keep the laser focused on the ignition point. This sounds great and I'd love to see it come to the states. If it translates to more power, better efficiency, more MPG, then you bet people will go for this.

Doubt it will make much difference. If a better plug could produce better power (and in turn mileage) manufactuers would be using them. They have toyed with some two plug heads but even that was ruled to be not worth the effort. My 96 ford ranger 2.3 had 2 plugs per cylinder.
Not to mention the manufactuers could be putting in those split whatever plugs and send lots more juice to em. It just hasn't turned out to be worth it. Not even in formula 1 etc... They do probably run coils that are hot as heck but I bet they run plain ol iridium plugs.
 
Laser will work better for direct injection inside the cylinder head, you can have an inhomogeneous mixture.
 
Researchers also point out that the lasers use less energy than their spark plug counterparts, eliminate wear items and wires (fiber optics will carry the laser beam to the cylinders), and improve fuel burn by "watching" ignition from within the combustion chamber and sending messages back to the ECU to adjust fuel mixtures, timing, and ignition.

That's from the autoblog story on this. Those fiber optics will be terminated with a small emitter lens I'm sure. The question is what will the lens itself be made of to prevent carbon buildup on it. So you will probably have to replace the emitter lenses pretty often I guess.
 
That's from the autoblog story on this. Those fiber optics will be terminated with a small emitter lens I'm sure. The question is what will the lens itself be made of to prevent carbon buildup on it. So you will probably have to replace the emitter lenses pretty often I guess.

fuck that! My windshield only has room for one sticker!
 
That's from the autoblog story on this. Those fiber optics will be terminated with a small emitter lens I'm sure. The question is what will the lens itself be made of to prevent carbon buildup on it. So you will probably have to replace the emitter lenses pretty often I guess.

Carbon Build up? [in theory] If this thing is as efficient as they are caliming this will not occur. Carbon is just unburned fuel.
 
It might be more like a microwave than light. Microwaves can be easily produced and don't really require cleaning (they will pass right through carbon buildup)

I think they got the idea when people started noticing that frozen carrots placed in the microwave sparked.
 
Carbon Build up? [in theory] If this thing is as efficient as they are caliming this will not occur. Carbon is just unburned fuel.

carbon is the result of any fuel burning, and is a base component, the last bit of what ever is being burned that cannot be burned, the only way to get around this would be to go with a fuel source that has no carbon in its atom string like hydrogen or H20.. and yeah i was just wondering how they where getting around the fact that the emmiter will be cloged with gunk every few hundered feet, spark plugs work becuase they intrude into the cilnder head and see the blast front which helps to dislodge some of the carbon, i suppose the emmiters could as well, but i see some carbon here and there and suddenly the whole thing is just shooting laserbeams randomly around your compression chamber and not getting any where near hot enought to ignite the fuel.
 
Your going to end up with way to many mechanics blinding themselves when this comes out. Wonder if the laser will be strong enough to cut though flesh, if so, it might be worse...
 
Doubt it will make much difference. If a better plug could produce better power (and in turn mileage) manufactuers would be using them. They have toyed with some two plug heads but even that was ruled to be not worth the effort. My 96 ford ranger 2.3 had 2 plugs per cylinder.
Not to mention the manufactuers could be putting in those split whatever plugs and send lots more juice to em. It just hasn't turned out to be worth it. Not even in formula 1 etc... They do probably run coils that are hot as heck but I bet they run plain ol iridium plugs.


the reason is, physics. once you ignite the fuel, it will burn the same whether you ignited it with a spark or two sparks (or 4). once the fire is lit, its lit... thats why sparks plugs can never increase power. if your plugs are weak and failing, then of course youll get misfires and loss of power, but that just broken parts. any decent plug lasts 40k miles at least anyway, i dont see why this is a big deal at all. if anything, the lasers could potentially last forever, so it would be much like going from distributors to coils packs... doesnt change much other then reliability/durability.
 
carbon is the result of any fuel burning, and is a base component, the last bit of what ever is being burned that cannot be burned, the only way to get around this would be to go with a fuel source that has no carbon in its atom string like hydrogen or H20.. and yeah i was just wondering how they where getting around the fact that the emmiter will be cloged with gunk every few hundered feet, spark plugs work becuase they intrude into the cilnder head and see the blast front which helps to dislodge some of the carbon, i suppose the emmiters could as well, but i see some carbon here and there and suddenly the whole thing is just shooting laserbeams randomly around your compression chamber and not getting any where near hot enought to ignite the fuel.

probably over-thinking it. if spark plugs get hot enough to blow away any crap im sure the lasers can too.
 
Sounds like a way to really over engineer a simple problem.

Metal probes - put high potential across viola spark plug

rarified gas stimulated by radiation, use lenses to focus them so they get hot enough to ignite gas viola Ford comes up with it....

If it really works great, doesn't cost much more, and increases efficiency then I'm all for it. However the ignition is caused when the cylinder is compressed the most, so I can't see how a laser is some how more efficient since the place for the ignition is already minimized, I mean multiple ignition points? that means multiple holes to put lasers in... eh...
 
The laser will burn away carbon deposits as they occur, so carbon will not build up on the lasers route.

The reason it is more efficient:
More than one laser beam will enter the cylinder.
This is crucial because fuel density is not uniform so the best ignition point may not be at the spark plug.
More ignition points will also give a more even and thorough burn, producing more power and a smoother running engine. That should help reduce engine wear and fuel comnsumption.
They also stated that the reflected laser beam can relay information on the state of combustion so real time calibration can take place to keep power and efficiency optimal, for different fuels too.
Neat.
 
There is also the fact that a laser travels at the speed of light throughout the cylinder before ignition. A spark travels nowhere near as fast or far inside the cylinder before ignition. Makes sense.
 
The laser will burn away carbon deposits as they occur, so carbon will not build up on the lasers route.

The reason it is more efficient:
More than one laser beam will enter the cylinder.
This is crucial because fuel density is not uniform so the best ignition point may not be at the spark plug.
More ignition points will also give a more even and thorough burn, producing more power and a smoother running engine. That should help reduce engine wear and fuel comnsumption.
They also stated that the reflected laser beam can relay information on the state of combustion so real time calibration can take place to keep power and efficiency optimal, for different fuels too.
Neat.

Almost correct but multiple ignition points will cause knocking. The aim is to have a variable ignition point so that the engine can use an inhomogenous air fuel mixture. Less fuel will be needed for the engine to run at low load.
 
Sounds intriguing, indeed.

My 96 ford ranger 2.3 had 2 plugs per cylinder.

And, WOW, those punks were difficult to replace. Their supplemental dumb idea was putting in that painfully-underpowered motor...fortunately it's a spare car and not a daily driver.
 
Well... There is also the idea that it takes less wattage to ignite as well (80% less?)

So that means the alternator to charge the battery up again does not have to be as agressive, which means more power to actually move forward.

Although I'm not sure how much it would work out to be, but I can imagine that sparking so many times a second - its got to be a considerable amount of wasted energy.
 
Back
Top