Keyboard Not recognized shortly after post

nilepez

[H]F Junkie
Joined
Jan 21, 2005
Messages
11,829
I'm not sure this is an MB issue, but here's the symptoms
On a cold boot (and some, but not all, reboots) my keyboard is not recognized by Windows (this happens when installing windows from a DVD too).

The keyboard is a Logitech wireless model

If I pull the usb cable out and put it back in, it works.

When reinstalling windows, the mouse works up through the post, but when the bios asks me to hit a key to boot from an optical drive i have to pull the cable and put it back in or it goes to the HD (which has no OS).

This started happening a year or so ago (and until now i assumed it was windows), but I reboot so infrequently that it didn't matter.

I know that if I restart it doesn't always happen (and never happens if it goes to sleep).

Any pointers are appreciated. Thanks
 
are you plugged into a USB 3 port? I just noticed recently a similar issue on a clients computer and moved the mouse and keyboard to a USB 2 port and no more issue.
 
I had a similar issue for a long time with my mouse, while my keyboard was only effected briefly. Reinstalling Windows never fixed it for me. A lot of posts on various forums suggested removing drivers and reinstalling them but also got me no where. If you have USB 2 ports try those first as that did seem to be the fix for most people. I ended up finding a firmware update for my mouse that resolved it. So that might be worth a look to see if Logitech has any firmware updates for your keyboard.
 
Sadly it's in a USB 2 port and it's definitely been in multiple ports, but I'll try moving it to the front USB port (also 2) just in case.

Don't know what I could do with drivers. i think it just uses the Windows default (it's an old split keyboard, so there haven't been drivers in a while). FWIW, it did this under 7 and 8.1. I guess I can try swapping keyboards (I've got 2 or 3 of them laying around here)

Thanks for the input. At least I know it's not just me.
 
Do you have 'usb keyboard support' enabled in CMOS setup?
 
Do you have 'usb keyboard support' enabled in CMOS setup?

I just did a quick run through the BIOS and I don't see a USB keyboard option in the CMOS. Maybe I missed it, but I didn't see it. FWIW, this is an old Gigabyte p55ud4p.
 
I just did a quick run through the BIOS and I don't see a USB keyboard option in the CMOS. Maybe I missed it, but I didn't see it. FWIW, this is an old Gigabyte p55ud4p.

I downloaded the manual for your board, try this:

Integrated Peripherals->
---USB Legacy function (set to enable)


If it only happens 'sometimes' it might actually be a hardware problem, do you have a lot of stuff connected to USB? Disconnect some you don't need and re-check.

Check another keyboard to rule out a bad cable.
 
I downloaded the manual for your board, try this:

Integrated Peripherals->
---USB Legacy function (set to enable)


If it only happens 'sometimes' it might actually be a hardware problem, do you have a lot of stuff connected to USB? Disconnect some you don't need and re-check.

Check another keyboard to rule out a bad cable.

It was already enabled in the BIOS.
It's not the cable, because I've used it on different PCs without this issue.
There's only 3 or 4 things connected to USB right now (including a thumb drive), but when I reinstalled Windows last week, it happened and the only thing plugged in was the keyboard and sometimes the Mouse.

I'll try swapping my keyboards around or using the PS/2 port.

It doesn't happen all the time and doing something like a reboot in one way will not cause it to lose the keyboard, but done another way it will (even though I believe both ways were using restart from within windows). If it's the MB...well it's not fatal, so I can repurpose the MB/CPU after Skylake is out.
 
Last edited:
Well, sorry, that's about as far as I can do from way over here.

One suggestion is to boot a Linux Live CD. Text only, if you can.

Why you may ask... I've diagnosed some weird USB device faults simply by having a console window open, plugging devices in and out, using them a bit, and watching the output of the `dmesg' command every few minutes.

It can show you 'silent' errors reported by the USB hub or specific USB devices.

My bet it might be a BIOS issue, PSU issue or your motherboard's USB power regulator is failing.
 
Well, sorry, that's about as far as I can do from way over here.

One suggestion is to boot a Linux Live CD. Text only, if you can.

Why you may ask... I've diagnosed some weird USB device faults simply by having a console window open, plugging devices in and out, using them a bit, and watching the output of the `dmesg' command every few minutes.

It can show you 'silent' errors reported by the USB hub or specific USB devices.

My bet it might be a BIOS issue, PSU issue or your motherboard's USB power regulator is failing.

I may try that, but for I just swapped the keyboard for a different logitech comfort keyboard, shut down then started back up and it works. I'll test the other one on my server when I patch it next month, but I'm almost certain I've run that test before.

I tested the PSu with a tester last week and I think one plug was a hair under volted (11.9x vs 12) but I'm not overclocking, so I doubt that minor undervolt would cause this.
 
Well, the problem with PSU testers and voltmeters is that they may not catch very fast drops like when you suddenly apply a capacitive load. I use them just as a sanity test, but the real test is stressing hardware and see if the magical blue smoke decides to leave.

Another argument for Linux is that I have personally seen a USB mouse that would operate properly in Windows. The Linux kernel, on the other hand, kept announcing USB hub problems. I'd connect another mouse and the messages were gone.

It's cutting a problem in half...

Good luck, if you need help with the Linux bit feel free to ask.
 
Back
Top