K8V will boot, but I can't install windows

Mojo

[H]ard|Gawd
Joined
Jan 28, 2003
Messages
1,569
If I sound like a newb, it's because this is my first self-built.

Okay, I just built my computer, it booted fine, showed the right amount of ram and detects all the IDE devices fine. But when I try to install windows XP it goes something to the effect of:
"Detecting hardware configuration"... then a few seconds later it goes... "/i386/biosinfo.inf failed to load, (error 8192 for cdrw as 1st boot device, and error 4096 for dvdrom as 1st boot device)."

Any help from [H]?

Main parts are: Athlon 64 3000+, Asus K8V, 2 x 512mb Corsair Valueselect, 80gb WD, 16x LiteON DVDrom, 52x24x52x LG CDRW, Enermax 350w PSU.
 
if your still having trouble after I told you on MSN, it's one of the following:
- your copy of Windows is messed up, find/use another
- ram is bad (testing your ram: install and use one at a time, or run memtest before installing)
 
I had a simliar problem and it wwas the ram settings, make sure you run factory optimized defaults when you install windows then tweak with the settings that might help as well.
 
I don't understand how the CD can be scratched or a bad copy as I have used it before several times. I will try switching around the memory settings.

On another site I heard that if you use a Win98 boot disk to format then you can install windows XP just fine after you reboot and start with cd support (putting in the XP disc), is that true?

EDIT: - I ran memtest, everything seemed fine. No errors.
- I took 512mb of ram out at a time (tried with each stick) and I kept getting the same errors.
 
Back
Top