K7N2 need help with bios problem

CVNet1

[H]ard|Gawd
2FA
Joined
Oct 10, 2002
Messages
1,183
Ok, I have a MS-6570 K7N2 (non -L) motherboard. Heres what happened: I just recieved this from another guy on forums. Booted it up and everything seemed alright but before I bothered installing an OS or anything, I decided to flash the bios to the latest version. So I look up online to see what the latest version is. Amazingly MSI didn't make any distinctions in model # or revision between their motherboards that are K7N2-L and K7N2 (not -L). I happen to own a -L version of this motherboard and it is exactly the same. So that aside, I originally attempted to flash with a K7N2-L bios and recieved an error saying the bios version checksum doesn't match the correct version for that board. That leads me back to MSI website where I find out theres a difference and then I grab the "Correct" bios for the K7N2 (non-L). Take that to the computer, flash and all seems well (AWDFlash is happy and the flash is successful). Reboot and everything looks good, go into bios and set things up and all is fine. Let it boot and well theres a problem. The computer goes from the post screen to a blank screen with cursor flashing. Usually this would be the time you'd see the ESCD update take place and the various devices assigned IRQs be listed, but none of that shows up. Its like the ESCD is frozen/stuck and won't update. The floppy light comes on but no booting occurs (same with CDRom ATAPI boot attempts). And the computer just sits there with its flashing cursor. My initial reaction was crap it was the -L variety after all and the boot sequence is screwed atm. So I using some very fine computer tools removed both bios's from both K7N2 (and -L) motherboards and arranged on the -L to flash a -L bios to the chip from the non-L board. Get that done, replace the chip, and no post. So Now I know for sure its a non-L motherboard. Next step of course is to replace the non-L chip with a non-L bios and having done that I'm back to square 1 with a happily posting but no booting computer. I've tried to turn off the floppy controller and most of the other things. I've tried setting up ESCD manually and nothing, I've tried PNP vs. non PNP OS setup --nothing. I'm really beginning to wonder what I can do to make this work again. Its quite annoying. Any help from anyone with any idea how to make this work again would be much appreciated.
Thanks
---John

After a little more work with the problem, I flashed the bios chip for the non -L board to the original bios that came with the board (the one I backed up on my first flash attempt when things worked correctly on the original board). And the same problem I had before still persists. I've also tried reseting the bios and putting the motherboard into safe mode along with other jumper setting attempts to get things back to working after initial post, but nothing helps I just keep getting that blinking cursor and no boot.
Oh one more thing the little bios light thing seems fine until it gets to boot sequence.
looks like this: 0 = red 1= green

0 1

1 1
manual says thats the floppy boot initialize
 
I'm no expert, but to me it sounds like you've got some cables backwards.

Good luck!
 
Well, the cables configuration hasn't changed at all since I started messing with this. When I originally flashed it, I did so from a floppy drive The only change that happened has been with the bios version on that chip.
 
Thats kinda messed up. Have you possibly stoped by another forum for help with that, i believe there are some forums that offer official support from MSI Techs around, im just not 100% sure on that. ive heard of cold boot problems with MSI motherboards, and to an extent i had some problems with mine in that regards.

Try this, reflash the motherboard (if possible) with the 100Mhz Jumper on 100Mhz. That way the board is running close to default slow clock speeds.

The cold boot problem i was refering too happens when you apply a voltage to the cpu, the motherboard will not apply that voltage fast enough to load the cpu at the clock speed you have it at. This may be your problem.

Put it all back to defaults, clear Cmos. Jumper 100Mhz, reflash with board's default bios, reboot. Keep at 100Mhz, set CPU to default clock, default voltage, SPD memory, save and power down. Put jumper on auto instead of 100mhz, boot.

See if that works.
 
problem solved. I ended up having to reflash the K7N2 bios on the K7N2-L motherboard and I had to have awdflash clear the ESCD PNP and DMI caches, then upon flashing the bios I had to force it to not program using blocks and thankfully that did the trick. After replacing the bios chip to its correct motherboard, the computer posted and booted properly again. So I guess the moral is if you are going to flash your bios from a Dos boot disk, make sure you set it up to clear ESCD PNP and DMI caches when it does it (I think that the block mode programming is usually just fine unless you end up with a case like I had where things got FUBAR'd somehow.)
 
Back
Top