K7D Master Caps Popped :(

eighteen_psi

[H]ard|Gawd
Joined
Jan 28, 2002
Messages
1,030
Guess the upgrade/changeover to the dual xeon will be coming sooner than I thought and without the financial boost from selling the AMD rig.

Anyone have experience with replacing the caps on this or other boards after they leak? There are a few with swollen tops and 3 or 4 in various places (none of the large ones) that have leaked. Any ideas on where I can get replacements for a resonable amount of money or is it even worth doing?
 
as long as you replace them with the same farad capacitor you should be fine....



actually lemme ask someone who did replace the caps on his motherboard.
 
Originally posted by eighteen_psi
Guess the upgrade/changeover to the dual xeon will be coming sooner than I thought and without the financial boost from selling the AMD rig.

Anyone have experience with replacing the caps on this or other boards after they leak? There are a few with swollen tops and 3 or 4 in various places (none of the large ones) that have leaked. Any ideas on where I can get replacements for a resonable amount of money or is it even worth doing?

yup I replace them all the time... just have to have the same caps to replace... but thats easy....

worth is if you like to keep that board, parts cost in caps will prolly be less then 5 bucks easy. if you do replace the board shoot me a PM. I might take the master from you....
 
I've got plenty of electronics experience..just nothing specific to thiis problem. Assuming nothing else went out (does the wretch'd fluid hurt other stuff?) I should be able to do it without any trouble. I was asking $300 shipped for my 1700+'s (at 2100Mhz), that board and a pair of SLK-800A's w/smartfan II's...If I repair it and those interested before don't still want it I'd cut you a better deal. Email me if you want:

amddually@derickshaw.com
 
(does the wretch'd fluid hurt other stuff?)
erm, yeah that stuff is acid. Dont touch it & rub yer eye...
if you get it off the board fast - no problem (use clean lint free cloth)
if it stays there for a while it can cause issues
as for the swapping of capacitors - yeah if you are good at that stuff you can do it - just make sure you get the correct amp - replace with the same brand/model - but be careful and if you replace & resell tell the buyer ok?
 
Not sure if its less than 2 years old or not...I need to talk to the previous owner but I doubt it since its one of the original green PCB ones (no usb, no nic).

Anyway, yes, the 2CPU FS/FT thread was updated to reflect the cap issue ;) Most of the interested parties don't seem to mind assuming I can fix it.....which suprised me but hey, sounds good.

I'm thinking I'll have one of my enginner friends do it...his place probably has everything I need (and they design/build various industrial boards all the time). Maybe he'll rip out all the old crap, replace it and run it through the solider pool for me.
 
Back
Top