Just how important is the Power Supply?

r00k

2[H]4U
2FA
Joined
Aug 24, 2004
Messages
2,696
I know this seems like one of those "should search first ask questions after" threads, but I want concise and consolidated information. I have recently become comfortable and enthused about overclocking. One reason being that I want to extend the life of the rig in my sig performance-wise. My curiosity is this:

Just how much of a difference can the power supply make in an overclock, and in overclock stability?

Currently, I have a generic 400 watt power supply (model LPK2-30). Rails are marked: +3.3v @ 28A , +5v @35A , -5v @ 0.5A , +12v @ 15A , -12v @ 0.8A , and +5v SB @ 2A.

I have the following running off of it:
AthlonXP 2600+ Barton
Gigabyte GA-7NNXP mobo
2x256meg dc ddr corsair twinX
ATI Radeon AIW 9600 Pro, 1 PCI 4-port switch card
3x 7200RPM 8m cache hard drives
1 dvd+r/w drive, 1 48x cd-rw drive
2x 12inch cold cathode UV lights
2x antec 120mm low speed fans, and 1 80mm fan on volcano 7.

In addition to the above questions, would what i have be considered too much for my PSU?
 
Good PSU is very important for good OC. Good PSU must have stable voltages because if it doesn't, your computer will be restarting or CPU and graphic card will recieve less juice.... :D I hope I wrote this right... :D
I recommend you Tagan 480W or if you have more money OCZ Powerstream.


P.S.: Sorry for my English.. :D
 
I had an Enermax365 or something and thought that was great.
Well let me tell you my new PC Power & Cooling 510 is increadable!
The rails are alot more stable and I can Ovclk alittle more.
The PCP&Cing has one of the tighest tolerances around,Even at higher ambient room temps,
Most PS are rated at a lower temp and as the temp rises yield lower output.
The other nice thing is that the power is alot cleaner .
You can tell the differance.
Check out the Power supply section and ask some stuff there, real smart folks
 
A good power supply is critical to a good overclock. If you're giving inconsistent voltages to your processor, it will give you inconsistent results. A good PCP&C PSU is worth every dime in stability and power.
 
just installed my super flower 550w PLUG-N psu last night......

running nicely so far. XP2500+ @ 3200+, 2 hdd's, blah blah.....
gonna use this for my A64 setup im building soon.
 
FiNaL_MeTHoD said:
I can think of about 38 other things I'd rather spend $200+ on.... :rolleyes:

Yeah that makes no sense of me posting that, since this is a thread asking about good power supplies.

If you plan to overclock this power supply is a must. If you plan to power a SLI board this PSU is a must. Hell if you plan to volt mod your RAM, this PSU is a must.

Noob. :rolleyes:

This power supply has taken a 2.4c to 3.6, a 3000+ to 2.9ghz a 3200+ to 2.8ghz, a 3.2c to 4.0ghz....and its next victim is a P4 3.6ghz.....

If you want a good power supply, get any of these top models. I just think that OCZ makes the best one.
 
If hes just now started ocing, he should take that $200.00 and get somehting like a ThermalTake purepower and a basic watercooling setup.. And a $200.00 Power Supply is not -critical-, any good quality Thermaltake is more than adequate for a modest overclock....Hell im overclocking as we speak on my Aspire Chameleon, not TONS, but I'm still overclocking on a PSU that is "junk" to the OCing Aristocrats.....
 
From a noob
Take majorpayne's advice. I can tell you that a reliable stable psu should be #1 on your list. You will not regreat buying the the best you can afford. There were a couple of excellent ones mentioned .
 
FiNaL_MeTHoD said:
If hes just now started ocing, he should take that $200.00 and get somehting like a ThermalTake purepower and a basic watercooling setup.. And a $200.00 Power Supply is not -critical-, any good quality Thermaltake is more than adequate for a modest overclock....Hell im overclocking as we speak on my Aspire Chameleon, not TONS, but I'm still overclocking on a PSU that is "junk" to the OCing Aristocrats.....

I can agree with this. I'm a very involved overclocker, i would say alot more than the average OC'er. Another good PSU is the Antec 550w. I believe they are about $95 or so on newegg. But i will tell you this. My 600w OCZ is the best PSU on the market. BTX compatable, PCI-e, SLI and tones of power leads. 2 seperate 12v railes and more juice than you can handle. They also make a 520w version from OCZ that is about $130 i think.
 
gclg2000 said:
I can agree with this. I'm a very involved overclocker, i would say alot more than the average OC'er. Another good PSU is the Antec 550w. I believe they are about $95 or so on newegg. But i will tell you this. My 600w OCZ is the best PSU on the market. BTX compatable, PCI-e, SLI and tones of power leads. 2 seperate 12v railes and more juice than you can handle. They also make a 520w version from OCZ that is about $130 i think.

Well yea no doubt it rocks, I just dont want this guy to be misled into thinking he needs to buy a $200.00 powersupply :)

P.S.- Heater, go away..."OMG URZ SO MUCH T3H N00B KTHXBYE!!" You're irrelevant input is not needed.....
 
Thanks for your replies. I would like to say, however, that right now i'm not as interested in "which top end power supply i should buy, and who's the n00b who disagrees?", but am more interested in WHY. For example, how much amperage should i be looking for on each rail? What effects are shown when there are too many components and not enough wattage? What experiences have people had running certain setups without enough power (like have you ever run 300 Watts for a power hungry system and how it worked out). Which rails are the most important, and how much deviation from the rated voltage can there be before the actual voltage affects stability? And how does this change, or how do requirements change for a processor when moving out of stock settings and into overclocked settings?
 
It is the most important for oc stability.
I upgraded mine from enermax660W to Zippy 700W. My fx55 is bench stable at 3.38Ghz :D
 
centvalny said:
It is the most important for oc stability.
I upgraded mine from enermax660W to Zippy 700W. My fx55 is bench stable at 3.38Ghz :D

Same experience for me, except with a OCZ 600w (<--alert...OCZ Whore) :rolleyes:
 
The total watt output is not necessarly what you should be looking at and the most expensive is not always the best !
If you give yourself a bit of head room today then the PSU will serve you a bit farther down the line !
Look at the Amp rating for each of the rails, +3.3v, +5v, +12V, for the past 4 years or so the MB Manufactures have been using the +12v rail
to power most things on the MB including the CPU, but other items like fans , HD's, optical drives etc,also still require +12V to function.
I would look for something along the lines of +3.3v=30a, +5v=40a, +12v=25a.
If your gonna add fluff to it like LED's and other lighting then you will need to figure that into your requirements.
 
oldbrave said:
The total watt output is not necessarly what you should be looking at and the most expensive is not always the best !
If you give yourself a bit of head room today then the PSU will serve you a bit farther down the line !
Look at the Amp rating for each of the rails, +3.3v, +5v, +12V, for the past 4 years or so the MB Manufactures have been using the +12v rail
to power most things on the MB including the CPU, but other items like fans , HD's, optical drives etc,also still require +12V to function.
I would look for something along the lines of +3.3v=30a, +5v=40a, +12v=25a.
If your gonna add fluff to it like LED's and other lighting then you will need to figure that into your requirements.
heres zippy700w with 45A at 12V line with Antec430W and Enermax660W (gold case)
psus1.JPG
 
gclg2000 said:
i think personally zippy is overpriced and over rated.
It came from my xperience with 6 psus. 3 of them fried. Never trust ocz psu since that 600W fiasco.
 
oldbrave said:
The total watt output is not necessarly what you should be looking at and the most expensive is not always the best !
If you give yourself a bit of head room today then the PSU will serve you a bit farther down the line !
Look at the Amp rating for each of the rails, +3.3v, +5v, +12V, for the past 4 years or so the MB Manufactures have been using the +12v rail
to power most things on the MB including the CPU, but other items like fans , HD's, optical drives etc,also still require +12V to function.
I would look for something along the lines of +3.3v=30a, +5v=40a, +12v=25a.
If your gonna add fluff to it like LED's and other lighting then you will need to figure that into your requirements.

So you would definitely suggest that +12v @ 15A is far too small, right?

 
r00k said:
Just how much of a difference can the power supply make in an overclock, and in overclock stability?

About as much difference as good gasoline, clean filters, and a properly tuned engine can make in the performance of your car. A cheesey power supply, or one not up to the demands of your system can cause instability, raise system temperatures, and make overclocking nearly impossible. Top it off with the fact that the specs on your no-name power supply are likely wishful thinking, as most generic PSU manufacturers' tests don't reflect real-world usage, so that 400w PSU probably isn't even close to the 400 watts it says, nor the amperage listed on its rails.

Check the Power Supply forum to read more about this; the question you asked here has been answered over and over again, and more details are available there.
 
ok, for the cheap nQQbz w/ boobs out there cash in on this deal

http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=876412&Tab=5

this psu rocks, is a clean build AND is $30 cheaper now... I use one and easy oc a 2.4 to 3.1 running 2-2-2-5 corsairs, no problems.. just an awesome psu and now for $70 u r nutz to ignore it.... with more cooling I will push it all fartherr with no worries from the power end..

-driven
 
as eluted to earlier, the most important feature on the PSU is probably what it's rated at on the +12 V line. It is not necessary to have an enormous power supply for a good OC or a stable system, however it does have to be one that can power YOUR setup. If you want to OC a pentium4 prescott then a big power supply is usually required as they pull an amaziing amount of current/wattage. However the old xp processors usually don't pull that much I could stable 2500+ to 3200+ OC's and plenty greater with a generic 300 W PSU. I would also do what was suggested earlier if your going to use an intensive graphics card and a power hungry cpu make sure you have about 25 A on the +12 line. (However I think even that is overkill) ---> I could run my p4 at 3.7 ghz prime stable on a generic 485 W, and i'm running the combo below on the antec 380 W. To sum it up, a psu that can power your system comfortably is very important for stability, but a lot of systems don't require as much power as the crazy 600 W PSU's supply. Oh and btw I had a 550 W PSU from the company that makes the connect X that eventually died powering a dual athlon xp-M, while an antec 400 W hasn't failed on me yet.
 
One thing being overlooked: The temp at which the rating is taken is extremely important.

Go to the PS threads or do a google, it will back me up. As ambient temps rise the efficency decreases. So while one PS might state that it is rated at 400w That might be at 20c,
Let that same PS hit 30c and it will no longer be as stable as stated and as powerful.
Bottom line is you spent a truck load of kaasch and time on building your system, why skimp on the PS?
 
driven2sin said:
ok, for the cheap nQQbz w/ boobs out there cash in on this deal

http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=876412&Tab=5

this psu rocks, is a clean build AND is $30 cheaper now... I use one and easy oc a 2.4 to 3.1 running 2-2-2-5 corsairs, no problems.. just an awesome psu and now for $70 u r nutz to ignore it.... with more cooling I will push it all fartherr with no worries from the power end..

-driven

you're fucking kidding right? :confused:
 
I have one of those pieces of shit and it's set two different 6800GT's on fire and fried four more. It's destroyed two 512MB Crucial Ballistix PC3200 modules, and I get pretty shit overclocks even with a vapochill.
 
RotorHead said:
Here's a guide that might help a little. :)

Linky

Thanks for the linky - very informative. And thanks everyone else who replied with relevant information. I think this information makes a believer out of me... no more generic shit power supplies for my builds. AMEN!!!
 
Back
Top