Just got my 6800 GT!!!

wiskeychris

Limp Gawd
Joined
Dec 17, 2002
Messages
168
So far, the card rocks!! Question, my temps go up to mid 70's while I'm playing games, is this normal? Also, I thought there was an overclocking utility built-in to the drivers? If not, how do you overclock this thing? BTW, my 3d mark 2k3 was 10500. Way up from the 4200 I would get with my 9700.
 
Those temps are normal for a GT under load. You can expect up to around 95C if you run something extremely stressful like the HDR demo on an OC'd GT.

http://www.daionet.gr.jp/~masa/rthdribl/

I wouldn't worry about temps until it starts getting close to 120C. When it reaches 120C it will downclock itself to prevent damage to the card. Its pretty much idiotproof.

You will need to install CoolBits to unlock the Clock Frequencies tab in your drivers options.
 
yeah those temps are fine, btw you might wanan put some as5 orsimilar on it, I took my heatsink off last night to find dried up silver crap. I believeit dropped the temps a good 5 c
 
I removed the two PCI backplate covers below the AGP card and it had a pretty decent effect on 6800GT (stock speed) temps...........

Card idle/Card ambient - 64*C/47*C
Card load/Card ambient - 87*C/62*C

Removed 2 PCI backplate covers......

Card idle/Card ambient - 58*C/41*C
Card load/Card ambient - 80*C/56*C

The only downside is that some airflow is being robbed from the front of the case (unless you have a front case fan) and your HDDs may get a bit warmer. It's a nice drop in GPU temps though. :)
 
The only downside to doing that is now you'll have lots more dust to clean up :) hehe
 
This is strange.....

I installed the Coolbits 2 registry mod so I could adjust the 2D and 3D operating frequencies of my 6800GT. I changed the 2D core frequency to 200MHz and waited for the chilly, arctic-like temperatures to appear.......and did they?

Did they arse!

My idle temperature leaped +4*C (needless to say there was nothing 3D running anywhere!). WTF? :confused:
 
theNoid said:
The only downside to doing that is now you'll have lots more dust to clean up
True, I'll need to stick some sort of dust filter over the gaps. :)
 
Thanks guys! I've now overclocked my card to 401 core and 1.11 Memory, which I believe is the Ultra settings. Correct me if I'm wrong, please. what is the 3d and 2d settings for? BTW, I'm now getting 11,120 on 3dmark2k3. NICE!
 
Congrats. I hope to be getting one soon. Just had a 2nd round job interview for a software engineering job today, which went well. If I get the job I'm getting a BFG 6800GT & a really expensive scotch at the pub around the corner to celebrate. Might buy some opera tickets too... :)
Hopefully my duallie Athlon rig's 266MHz bus won't bottleneck it too much. Still, I'm sure it'll be a nice improvement over the pixel shaders on my 5900. I'm a Linux whore, so ATI cards are pretty much out for me.
It's a good thing these cards can take 120C. I don't have any slots free, which is why I'm getting a GT instead of an Ultra. My 5900 gets up to 80 under load. Now that I've ducted a slot fan to blow over it it's better, but I don't think I'll be able to do that w/ the standard 6800GT cooler.
 
Just pulled the trigger on a GT myself. Congrats on the new card.

I'll be joining you on Thursday! :)
 
You guys make me SICK!!!!! (with envy :p ) Congrats on the cards... some FRAPS info on maybe something like NFSU or Flight Sim 2004?

Have fun...
 
Back
Top