• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Just got into watercooling..

RicKuRuKuS

RicKuRuKuS

[H]ard|Gawd
Joined
Mar 21, 2003
Messages
1,409
Hey guys, I just got set up with a watercooling setup and it is flippipng awesome... The case is a Lian-Li but I forget what model it was. I am set up wth a Koolance cooling system and it keeps everything around 27-30 celcius... However, I would like to start doing some overclocking. I haven't really ventured into the realm of overclocking too much, so could I get a few tips on where to begin? I know how to get into BIOS and all that but I don't understand the voltage stuff... Thanks for helping if you can my system info is in my profile.





 
Sweet system, hopefully by the time I buy another Koolance system they will have a 3/8 GPU cooler so I can run a pure 3/8 system.
 
acascianelli said:
Sweet system, hopefully by the time I buy another Koolance system they will have a 3/8 GPU cooler so I can run a pure 3/8 system.
Click to expand...

Or you can do what I did, mate the exos 2 with AC blocks, that's all 3/8 :)
 
Please tell me the temp diode isn't between the pressure bracket and the top of the water block on the CPU... :eek:
 
madmat said:
Please tell me the temp diode isn't between the pressure bracket and the top of the water block on the CPU... :eek:
Click to expand...

Well I hope not, but it seems common practice to run the probe wire through that bracket to act as a slight strain relief. The sensor goes underneath the CPU block, but is held in by just a little tiny piece of copper tape and it is easy to pull out.
 
a guy from koolance actually set it all up for me... they sponsor my counter strike source team www.axxium.org and we got free cases and what not for CPL to help them market... i have never water cooled before so I am just trying to be safe whatever I do but now that I got this hella nice setup, i wanna work it some...

-warsaw
 
well first of all before overclocking you need to clean up the wire mess ... post side pictures in this thread, ofcourse with the panel off .. Post your "rate my cables here"

After that is all done, you will be able to show off your system and overclocking won't matter as much. If you want to overclock you need to start a thread in the AMD section, not here.
 
mohammedtaha said:
well first of all before overclocking you need to clean up the wire mess ... post side pictures in this thread, ofcourse with the panel off .. Post your "rate my cables here"

After that is all done, you will be able to show off your system and overclocking won't matter as much. If you want to overclock you need to start a thread in the AMD section, not here.
Click to expand...

or he could start a thread in the overclocking&cooling section, of which this is a subforum.
 
warsawtag said:
they sponsor my counter strike source team www.axxium.org
Click to expand...
I sat by you guys at the last PDXLAN!
Someone stuck an anti-smoking sticker on my case after announcing that "axxium thinks you have a kickass case" :(
Crazy bastards ;)
 
Vertigo Acid said:
I sat by you guys at the last PDXLAN!
Someone stuck an anti-smoking sticker on my case after announcing that "axxium thinks you have a kickass case" :(
Crazy bastards ;)
Click to expand...

lol that cracks me up, we will be at pdx lan yet again promoting our cause :)

-warsaw
 
You must log in or register to reply here.
Back
Top