• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Jumpers on HDD -> which position?

T

The Saint

Gawd
Joined
Mar 18, 2003
Messages
1,000
Good morning guys!

I'm about to connect the HDDs in my box:
1 SATA 3Gb
2 PATA

I was wondering on which positions should the jumper be on the two PATA HDD? Should I leave one on Primary and the other one on Secondary?

The SATA HDD will be the Primary HDD, and the other ones just for backups and data....

:)

Thanks

Emanuele
 
The jumpers on the PATA drives are only relative to those on the same physical cable. Therefore, the jumpers should be set as one to master and one to slave if you have two PATA drives on the same cable. If they are each on different cables, they should both be set in the Master or Single Drive position.
 
Thank you very much for the explanation UICompE02!

Really appreciate your help...!

:)
 
You must log in or register to reply here.
Back
Top