Jumbo Frames "Too Large frames"

[archivalbackup]

I haven't done much with Jumbo Frames yet, so I am wondering if this output is normal ....

are "too large frames" and "valid frames, too large" just Cisco's way of saying you have an MTU > 1500?

#sh controllers ethernet-controller gi1/0/1

Transmit GigabitEthernet1/0/1 Receive
1756413915 Bytes 3239522714 Bytes
148681899 Unicast frames 173688333 Unicast frames
2896248 Multicast frames 0 Multicast frames
38652 Broadcast frames 2111 Broadcast frames
0 Too old frames 3239387610 Unicast bytes
0 Deferred frames 0 Multicast bytes
0 MTU exceeded frames 135104 Broadcast bytes
0 1 collision frames 0 Alignment errors
0 2 collision frames 0 FCS errors
0 3 collision frames 0 Oversize frames
0 4 collision frames 0 Undersize frames
0 5 collision frames 0 Collision fragments
0 6 collision frames
0 7 collision frames 2888 Minimum size frames
0 8 collision frames 72277130 65 to 127 byte frames
0 9 collision frames 73223 128 to 255 byte frames
0 10 collision frames 57719 256 to 511 byte frames
0 11 collision frames 591326 512 to 1023 byte frames
0 12 collision frames 259529 1024 to 1518 byte frames
0 13 collision frames 0 Overrun frames
0 14 collision frames 0 Pause frames
0 15 collision frames
0 Excessive collisions 0 Symbol error frames
0 Late collisions 0 Invalid frames, too large
0 VLAN discard frames 100428629 Valid frames, too large
0 Excess defer frames 0 Invalid frames, too small
3376163 64 byte frames 0 Valid frames, too small
86478302 127 byte frames
23926 255 byte frames 0 Too old frames
173098 511 byte frames 0 Valid oversize frames
3065637 1023 byte frames 0 System FCS error frames
273307 1518 byte frames 0 RxPortFifoFull drop frame
58226366 Too large frames
0 Good (1 coll) frames
0 Good (>1 coll) frames