Issue after WC install

D

dukefan6842

n00b
Joined
Feb 15, 2006
Messages
6
Ok, so i spent about 6 hours installing my dangerden kit in my v2000, after a successful install im having a problem. It boots fine up to desktop then i get a crazy memory error and a bsod, then restart. After playing around with ram configurations, i got it to boot fine, and used it for awhile last night. I left it running overnight, then woke up to a bsod. I changed the config again, and it works. Im at work now, but im expecting more trouble once i start overclocking......any ideas what might be causing this? i know its not the watercooling bc my temps are great, 21º celsius idle. Im guessing something got bumped/jostled...it might be a cmos setting since my cmos got reset in install when i unplugged my mobo.

any help would be GREAT
 
Is that temp for your cpu or ambient in the case? If, after installing your wc there's no airflow through the case, the ram could be overheating.
 
no chance, the side panels are off, and ive got a 120 blowin right on the ram, and yes thats the cpu temp 21º
 
You must log in or register to reply here.
Back
Top