• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

IS7 won't boot PLEASE HELP ME

S

SocceRich20

2[H]4U
Joined
Aug 4, 2003
Messages
2,512
I used to use Kingston Value RAM PC2700 in my IS7, with a 2.8C. Recently, I replaced my value ram with HyperX PC4000 ram. It booted fine, and ran well. Then I changed the game accelerator from auto to F1. Upon trying to boot, I got a series of long beeps. So I clear the CMOS, by powering down, changing the jumper, and switching the power supply on, leaving it for a minute or two. When I replace the jumper in the normal position, and try to boot, everything turns on, and I get the single beep that normally occurs on a sucessful boot. The only problem is, nothing shows up on my monitors, and the video card has been reseated several times. I have tried booting and clearing cmos with both ram sticks. Immediate help is greatly appreciated. Thanks.
 
You must log in or register to reply here.
Back
Top