IS7, Good Buy?

sdk

[H]ard|Gawd
Joined
Dec 2, 2003
Messages
1,597
I was thinking of getting a IS7. Specs are in my sig. Ideas? Suggestions?
 
i JUST got one, and i put it into my aspire case, and threw in a 9600se and it isnt working. I still dont know why. It seems liek there may be a connection problem from the card to the moniter, but ive tried mutliple moniters/cards. i think the mobo its self might be messed up.

..more in reponse to your post, my friend has one and loves it, and aside from not working the only probs i see are the alignment of the screw holes, and the fact that the APG slot and the DDR are REALLY close togheter
 
cheap board, nice features. Gigabit ethernet, nice onboard sound, SATA support, good board for decent - not insane - overclocking.

CPU temp sensor readings can be goofy. Some boards report much higher than normal temps (nothing wrong with your CPU, its just the way Abit boards report temps). don't be surprised if your CPU temps read 10-15C higher than other boards, its not a bug, its a feature :).
 
My asus does that I think sometimes. Tho, this one had 4 x agp, tho crappy support for 2700 ram only, (even tho i just bough a 512 of corsair xms)
 
IS7-E is what I have, and it has run completely solid for me, im going to attempt some light overclocking soon, and i will see how that goes
 
Originally posted by quiksilverx181
IS7-E is what I have, and it has run completely solid for me, im going to attempt some light overclocking soon, and i will see how that goes

Mine takes my 2.8c to 3.55GHz np.

I would say go for it, it has been one of the best Motherboard's that I have had. Of course Abit and Asus are the number 1/2 Mobo Manufacturer's around, so it is no suprise.

/IoWnZa
 
Honestly, I'd spring for an IC7-G or the Max-3 version.

Overclocking is alot better than the IS-7 and I've heard maybe half of the problems reported. If you really have your heart set on the IS-7, I'd wait for another revision model or two. Just to be sure...

Dark Assassin
 
my friend and i both just bought IS7's... mine seems to be having an issue similar to what sk8rdavid mentioned above... it seems to be having a problem in between boots... once it gets all the way to windows it runs great.

once i shut down though, it seems like a 50/50 chance it'll start all the way up next time...

i'm hoping it's a problem on my end (just gotta new CPU and RAM too, need to figure out best bios settings etc...)

i'm DLing all abit updtaes now...

my friend's having no problems... it's probably just something i'm doing at this point..
 
I've got the IS7-E. Great board. Lots of people use the IS7 series, and for a very good reason.
 
Bjork, I would say that every 1 out of 30 times I turn my Computer on, I will have to hit the button again and start her back up. It will power on but not do anything, no hdd spin or anything like that.

/IoWnZa
 
I personnally would get the IC7-G Max-2 or the Max-3 version.
 
Originally posted by darktiger
I personnally would get the IC7-G Max-2 or the Max-3 version.

They are nice boards, but unless you need the Extra stuff, the IS7-E is a very inexpensive way to go, and it work's very well.

/IoWnZa
 
Originally posted by IoWnZa
They are nice boards, but unless you need the Extra stuff, the IS7-E is a very inexpensive way to go, and it work's very well.

/IoWnZz

i second this. built a Is7E for a friend w/ a 2.4b he inherited, runs like a charm, no hiccups and reasonably priced
 
Originally posted by sackowitz
i second this. built a Is7E for a friend w/ a 2.4b he inherited, runs like a charm, no hiccups and reasonably priced

I agree, why spend more money for around the same performance?
 
IS7-E here which is the same board withought firewire and onboard raid


have my 2.4 clocked to 3.4 (285 front side bus)

runs completely stable, no errors

built one for my dad with the IS7 becuase i liked it so much, worked like a charm also with no problems as of a couple weeks
 
Back
Top