Is this setup okay?

zaa730

n00b
Joined
Jul 18, 2008
Messages
3
Okay guys, I used to have a

amd x2 4400@ 2.5ghz
2gb pc3200 ram
500 watt psu
7800gt
sb x-fi card
asus a8s-x mobo (shitty mobo)
and some other peripherals
winxp sp3
wd raptor 74gb as primary

I was looking to upgrade that old 7800gt to a radeon 4850. I got the 4850 for about 150 from newegg, but then RMA'ed it because I was having serious problems. I recently managed to score a 260 gtx after these huge price drops and a "special" price mistake at bestbuy for $210 as my second replacement card. I put in the card and it appears to be working fine. So far I've only tested CS:S and there is a slight improvement over the 7800gt, but not much. Am I missing something here? I'm about to test newer games in a few hours (COD4, Mass Effect, Crysis etc.), but I'm wondering what's up with the "low?" performance gains.
Could someone tell me if I'm experiencing serious bottlenecks, not enough power etc.?
I worry that if it is a serious bottleneck, I can't OC my proc much because of that lame ass mobo. This is all socket 939 btw, so this is one of the best cpu's out for socket 939. I have a nice zalman cnps 9700 cooler installed for it, but still can't do much because if I try to set my fsb any higher than about 230 in the bios, such as 245, it will revert back to about 229 or 230 when I check in cpu-z. Temps aren't the problem, the mobo is. Also, maybe this is just all an illusion and CS:S is just an old game. I guess the card is performing fine, since I have yet to try "modern" games. After all I haven't seen any fps drop below 60 on 1600x1200, max settings, 16xAA etc.

Could any of the elders here please advice me?
:)
 
1) did you remove old nvidia drivers
2) is v snyc on or off? if on turn if off and see results
3) try out games and report back
4) how many amps on the psu 12 volt rail? 28-30 amps or more is needed
 
1) did you remove old nvidia drivers
2) is v snyc on or off? if on turn if off and see results
3) try out games and report back
4) how many amps on the psu 12 volt rail? 28-30 amps or more is needed

1 yea. (too my bets knowledge)
2 It's off.
3. Will do.
4. uhh... I'm 2 lazy to check. I will sometime..

NVM FIXED. I found my problem. It's the hdd.
 
Back
Top