is this capacitor defective?

Happy Hopping

[H]F Junkie
2FA
Joined
Jul 1, 2004
Messages
8,582
img4494b.jpg


are these capacitors exploding from the inside? As the motherboard is dead
 
thats not a good thing, but there is no way to say for sure if they are completely bad just from a picture
 
There is little chance that those capacitors are still within tolerance. They may or may not be the reason the mobo is dead.
 
The caps are toast - the electrolyte is leaking out, that's the brown stuff on top.
 
well, look at the bright side, at least I know why the motherboard is dead, thanks guys
 
How would caps explode from the outside???

That looks like a video card. Are you saying it may have damaged the motherboard?

What brand of caps are those? The "K" cutouts and the green & gold colors indicate they're Sanyo/Sun, which are typically among the most reliable, even in high heat. If the ones with goo on them are bulging on top, they're definitely bad, but otherwise I'd wonder if the goo came from another source.

What does the motherboard's caps look like?
 
How would caps explode from the outside???

That looks like a video card. Are you saying it may have damaged the motherboard?

What brand of caps are those? The "K" cutouts and the green & gold colors indicate they're Sanyo/Sun, which are typically among the most reliable, even in high heat. If the ones with goo on them are bulging on top, they're definitely bad, but otherwise I'd wonder if the goo came from another source.

What does the motherboard's caps look like?

I screw up. You are absolutely right. That board is NOT the motherboard. My apology. That board is the riser board for dual PCI E video card. The current symptom is:

The computer turn on, less than 10 sec. later, it turned itself off. There is no display on screen. The only suspect left is this riser board, or the motherboard (or both), the CPU and the memory. I am guessing it's not the CPU or the memory.

I disconnect hard drives, DVD+RW drives, remove 2 out of 4 memory modules, and remove both existing video card. Then I install a different video card, and this time, the fan of the video card won't even turn on.

The capacitors on the motherboard looks normal, it does not have the above problem.

On rare occasion, the machine does boot up for a few min. before it turn itself off.

Having said all of the above, do you think the above riser board is toasted?
 
Last edited:
That board is the riser board for dual PCI E video card. The current symptom is:

The computer turn on, less than 10 sec. later, it turned itself off. There is no display on screen. The only suspect left is this riser board, or the motherboard (or both), the CPU and the memory. I am guessing it's not the CPU or the memory.

I disconnect hard drives, DVD+RW drives, remove 2 out of 4 memory modules, and remove both existing video card. Then I install a different video card, and this time, the fan of the video card won't even turn on.

The capacitors on the motherboard looks normal, it does not have the above problem.

On rare occasion, the machine does boot up for a few min. before it turn itself off.

Having said all of the above, do you think the above riser board is toasted?
I think you may be right about the riser card because if it doesn't work, it could short the motherboard's PCI-e bus to ground. But it maybe replacing all those green capacitors may fix it, by restoring power.

When the machine does boot for a few minutes, do you see anything on the screen? If so, it's possible there's a bad connection between the motherboard, riser card, and video card. Some riser cards don't work well unless everything is firmly screwed in place so nothing can move at all.

Do you have the computer's PCI-E power connectors plugged into the video cards?
 
I think you may be right about the riser card because if it doesn't work, it could short the motherboard's PCI-e bus to ground. But it maybe replacing all those green capacitors may fix it, by restoring power.

When the machine does boot for a few minutes, do you see anything on the screen? If so, it's possible there's a bad connection between the motherboard, riser card, and video card. Some riser cards don't work well unless everything is firmly screwed in place so nothing can move at all.

Do you have the computer's PCI-E power connectors plugged into the video cards?

The machine boot for a few minutes on rare occasion only, and there is nothing on the screen. Further, when the keyboard is connected to the machine, by pressing the Num Lock or the Cap Lock key, there is no light.

I think the bad connection is not cause by a loose connection, rather, those capacitor kill the riser board. Because the whole machine fails when there is no screen and shut down w/i 3 sec. and at that time, no1 has opened the computer, so the riser board was the way it is all those years.

As to the video card, if you meant the 6V plug, the video card doesn't require it. Those 2 video card has been snapped into the PCI E x 16 slots all those time. When I removed both and swap 1 of my own video card, no difference, still won't boot.

It seems I have to replace this riser board, but I'll remove the riser board and see if the computer would beep. As so far, there is no beep.

I never put my hand on a Dell before, on my HP, it always beep twice during boot up, does a Dell make any beep during boot up?
 
Does the pic on the right look familiar? :)

(same caps)

http://en.wikipedia.org/wiki/Capacitor_plague

http://www.badcaps.net/

Dell, industrial espionage, lawsuits, and recalls...lol.

Search: "dell capacitor problem" on google and read some of the articles.

To fix any computer with this problem, remove all those caps, and replace with equivalent voltage, current, and frequency ratings. Digikey sells those for sure; I bought a bunch of a few different values.

If stuff is coming out, it's bad. All of them are the same crap, so replace them all.
 
I just replaced the whole board. I removed the above board, and the machine still won't boot up. So the motherboard AND this riser board both failed.
 
Back
Top