• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Is this a good PSU for this setup?

T

theslug

n00b
Joined
Dec 21, 2005
Messages
6
My rig mainly consists of a s939-nforce3 board, a geforce 6800gt (agp), 2x512 pc3200, and 2 sata drives. Here's a PSU I'm considering since I believe mine may need replacing (currently I have an antec truepower 480)

http://www.newegg.com/Product/Product.asp?Item=N82E16817104954

Seems good with 18A on each 12V rail and it's only $50. I think it's probably at least as good as the antec TP480. Any thoughts?
 
It's 18A on each +12V rail, all right - but with a maximum combined +12V capacity of 29A when both +12V rails are operating at the same time. (That 29A rating was calculated from the maximum combined +12V power output of 348W.)

Even with that 29A total +12V capacity, it should be more than sufficient for your particular rig.
 
You must log in or register to reply here.
Back
Top