Is there a mounting mechanism for a 50mm res that...?

[theDeviL]

Is there a mounting mechanism for a 50mm res that allows me to mount it along the side of a rad with 120mm screw holes?

 

[Nimisys]

1/2" strip of metal, 1/8" thick. drill and countersink two holes to mount it the res. add two Hose clamps in the SAE size ranges of 26 to 28 to clamp the res to the metal strip. bend the bottom of the metal strip 90 degrees under the res if you want to get fancy.

 

[pendragon1]

if you have res clamps with outside holes you can just get proper thread/length screws. no need for a bracket. this example is Alphacool Cape Cyclone (available in 60/80mm).


other than that no cost idea I found these:
Adjustable Reservoir Bracket
Bitspower 120 Water Tank Mount Panel (RAD Side)

hope that helps.

 

[theDeviL]

yeah it looks like I'm gna have to McGuyver something together to make this work. thanks for your opinions.

 

[pendragon1]

should not be too hard. let us know what you come up with.

edit: added the not where is was missing

cool ill watch for it

 

[theDeviL]

should be too hard. let us know what you come up with.

Semi build log coming...