is my PSU to weak?

Ragenrok

Supreme [H]ardness
Joined
May 15, 2007
Messages
4,594
Ok, well I have a cheaper 600w PSU with two 12v PCI-E lines, one runs at 18a and the other at 20a. untill recently I've always had an 8800GTS OC'd to 650/1008. Now I have an 8800GTX and at stock it runs fine, but since i overclocked it to my sig specs I thoguht it was working fine, untill I was playing hellgate London and started noticing white dots on everything.

When I opened rivatuner the card was only at 55c (I tested with ATI tool before and min load is 50c max is 63c stable) but my card was constantly downclocking back to stock then jumping back up to the OC.

Can the card not getting enough juice cause wierd artifacts? I'm pretty sure that it's downclocking back to stock is lack of power, but can artifacts be caused by lack of power?

This is the PSU I use
http://www.tigerdirect.ca/applications/searchtools/item-detailsInactive.asp?Sku=ULT31848

This card should atleats be able to run a GTX at stock right? It ran that GTS at the OC level no problem. If it will hold for 2 more months I'll ask the wife to get me a new PSU for x-mas lol.
 
While nvidia recommends a true 450W PSU for a GTX, it certainly pushes close to the boundaries of what a 450W PSU can deliver.

If your PSU is 80% efficient, (and the ultra brand is hit or miss with some models), then that means 480W is the maximum you can draw, in a stock C2D system, that's going to be around 300W of real draw, not near 480W.

Now if your system is overclocked, you will draw more power, add in hard drives, CD drives, PCI sound card etc and you will be pushing closer to to that limit. This is assuming your PSU can deliver it's 600W at 80% efficiency while still being clean power...

If you want to test if it's only your PSU, try unhooking unnecessary fans, cd-drives, extra hard drives and clock your CPU back to stock settings. Then crank up your video card. You can also test how clean the feed is by using power plug adapters to draw power off the other molex connectors rather than the PCI-E connectors to see if each PCI-E connector is giving enough clean power.
 
While nvidia recommends a true 450W PSU for a GTX, it certainly pushes close to the boundaries of what a 450W PSU can deliver.

If your PSU is 80% efficient, (and the ultra brand is hit or miss with some models), then that means 480W is the maximum you can draw, in a stock C2D system, that's going to be around 300W of real draw, not near 480W.

Now if your system is overclocked, you will draw more power, add in hard drives, CD drives, PCI sound card etc and you will be pushing closer to to that limit. This is assuming your PSU can deliver it's 600W at 80% efficiency while still being clean power...

If you want to test if it's only your PSU, try unhooking unnecessary fans, cd-drives, extra hard drives and clock your CPU back to stock settings. Then crank up your video card. You can also test how clean the feed is by using power plug adapters to draw power off the other molex connectors rather than the PCI-E connectors to see if each PCI-E connector is giving enough clean power.

You have efficiency wrong BTW, you can draw 600watts but with 80% eff. your drawing 720watt from the wall to maintain 600w.

If you have a decent UPS, you can see what your comp is pulling in watts and divide by your psu's eff. spec and see what your system is really using.
 
Back
Top