Is my Power Supply dead??

joepacelli

n00b
Joined
Apr 3, 2008
Messages
49
:confused:This morning I went to power on my PC and when I pushed the power button nothing. Everything worked fine last night before I powered it down. This power supply is a "Thermaltake Silent Pure Power W0049RUC 680W ATX12V / EPS12V SLI Ready CrossFire Ready Active PFC Power Supply" that I purchased on Feb 2006. So it's 3 1/2 years old.

The motherboard's green light is on. I opened the case and removed the power from everything but the motherboard and tried to power it on then. I came on for maybe 3 seconds. The CPU fan started but I also had a high pitch sound. Not the normal motherboard beeps when you have a problem. After 3 seconds, no power.

So I remove the PS and brought it to work with me hoping TigerDirect/CompUSA can do a quick test for free to make sure before I purchase a new PS.

But does this sound like the PS died?

Joe
 
That sounds exactly like what happened to me with a different brand PSU. It was working fine the previous day, then the next day it wouldn't power on. The best way to know for sure is try another PSU in your machine. I took the PSU out of my other machine and quickly confirmed that it was the PSU. I had to put the PSU back in the other machine, so I had to go buy a new one.

It's a good thing that you removed the PSU, because that was going to be my next suggestion. My PSU was less than a year old, so still under warranty. I had to send it to them first, and they'd send me a replacement. I couldn't wait for it to be replaced, so I jumped in the car and drove to my nearest BestBuy (which is an hour away), and got there a few minutes before closing.

When I got home with the new PSU, not 5 minutes later as I'm unboxing the new PSU, the computer just turned on. I was no where near it, and then smoke started pouring out of it, so I had to rush across the room to unplug it. :eek:

It's a damn good thing I didn't decide to stop and get something to eat while I was out.
 
Try the paper clip trick. Disconnect the PSU and remove it from your case, and then bridge the green wire on the 20 or 24-pin ATX connector with one of the black ground wires using a conductive object like a metal paper clip or a wire. Connect a fan or an old HD to the PSU, plug it into the wall, and turn it on with the switch on the back. It should start up and power whatever you have connected. If it doesn't, it's most likely dead.
 
Try the paper clip trick. Disconnect the PSU and remove it from your case, and then bridge the green wire on the 20 or 24-pin ATX connector with one of the black ground wires using a conductive object like a metal paper clip or a wire. Connect a fan or an old HD to the PSU, plug it into the wall, and turn it on with the switch on the back. It should start up and power whatever you have connected. If it doesn't, it's most likely dead.

That will tell you if the PSU is operating, but it won't load the PSU properly. I have a PSU that I am RMA'ing that will NOT power my system, but still "turns on" when you jumper the green and ground wires.s

The tech at Thermaltake told me to try this, and it did turn the PSU on, but it wouldn't power my system up, so he said "nothing wrong with the PSU, must be a RAM stick or mobo issue". When I swapped out for a new PSU, the system came right on.
 
That will tell you if the PSU is operating, but it won't load the PSU properly.
Obviously it won't load the PSU. But if you think a PSU is dead, failing the paper-clip trick is a good way of confirming it. Passing the test doesn't tell you much, but failing it does.
 
Back
Top