is 3.6 on the e6600 Stable?

Juice925

Weaksauce
Joined
Nov 9, 2006
Messages
82
Using proper air cooling methods such as a big cool case (p180), and a huge heatsink (Scythe Infinity), and good thermal paste (Arctic Silver)?

I realize I will be able to hit 3.6 but will the CPU really be stable to play games, and be under load, at that high?
 
I was just curious if the 6600 had the potential to be stable at 3.6. like do any people on this forum have their cpu that high without having it poop out?
 
Yea, the OC database tells less then half the story tho.

I have a E6600 and it will do 3.6, but not much over. And it certainly doesn't like it, I think the voltage it needs is a little too much, Orthos makes it goto 70, but if tat sets 100% cpu load it goes to 74c.

Which is fine as far as I care, but ofcourse I'd prefer to just run it at 3.2Ghz with a lot less voltage and then get much tighter timing out of my ram.

Remember, that extra 400Mhz makes ZERO difference in games. You'de be really hard pressed to ever notice it in anything other the benchmark scores.

Ie: I get a 2850 for cpu score in 3dmark06 with a 3.2, and get 3150 @ 3.6Ghz. 6670 total vs 6742 total. Which is nothing,
 
It all depends on how good the chip is.

My E6600 can do 3.6ghz with only less than 1.4V and during orthos it only goes to 40-45c

It idles @ 29-30c

So 3.6ghz is more than stable for me on air.

Even 4.0ghz is OK but it requires 1.52 for stability and temperatures would be in the low 40's to mid 50's during load. (I won't run orthos @ 4ghz because it would probably burn on AIR)
 
Back
Top