longtimepcbuilder
n00b
- Joined
- Jan 5, 2011
- Messages
- 3
Thought I would share a couple of thoughts with all of you.
I purchased a 80GB X-25m SSD a few months ago and have been looking to securely erase (i.e. wiping the LBA tables) it's contents since then as a means to test degradation performance. I.e. us it for awhile, document the performance, reset the drive and compare results etc...
I tried to use HDDERASE 3.3, 3.1 4.0 etc... but could get none of them to work. I tried most of the things I found within the forums i.e. making sure bios lock is off, resetting the hard drive etc... but none worked. I also tried various versions of Linux in an attempt to issue the secure erase command.
However, recently just by fate I downloaded the newest version of the INTEL SSD TOOLBOX which now has a "tuner" and "secure erase" feature.
I recently formatted the SSD, deleted the partitions and then performed a secure erase after having to unplug and replug the sata cable. Worked brilliantly, took about 45seconds or so.
However, one thing I did notice using HDTune Pro. The performance of the SSD appeared to be EXACTLY the same after I formatted vs after I performed the secure erase. I did not expect such as I don't believe the Windows 7 format via the windows explorer GUI issues a secure erase. However, the performance was EXACTLY the same around 218mg/sec average via the HDTune Pro benchmark?
Thoughts/comments.
Regards,
I purchased a 80GB X-25m SSD a few months ago and have been looking to securely erase (i.e. wiping the LBA tables) it's contents since then as a means to test degradation performance. I.e. us it for awhile, document the performance, reset the drive and compare results etc...
I tried to use HDDERASE 3.3, 3.1 4.0 etc... but could get none of them to work. I tried most of the things I found within the forums i.e. making sure bios lock is off, resetting the hard drive etc... but none worked. I also tried various versions of Linux in an attempt to issue the secure erase command.
However, recently just by fate I downloaded the newest version of the INTEL SSD TOOLBOX which now has a "tuner" and "secure erase" feature.
I recently formatted the SSD, deleted the partitions and then performed a secure erase after having to unplug and replug the sata cable. Worked brilliantly, took about 45seconds or so.
However, one thing I did notice using HDTune Pro. The performance of the SSD appeared to be EXACTLY the same after I formatted vs after I performed the secure erase. I did not expect such as I don't believe the Windows 7 format via the windows explorer GUI issues a secure erase. However, the performance was EXACTLY the same around 218mg/sec average via the HDTune Pro benchmark?
Thoughts/comments.
Regards,