Through a long and confusing string on incidents, I recently found myself in the possession on a new 3Ghz P4. When I tried to install in in my old Intel D865PERL motherboard, something happened to render the video nonfunctional. After swapping in a new videocard, I figured that the BIOS wasn't Prescott-ready, and must have ruined the AGP bus.
To make a long story short, I went out and got a new Intel D875PBZ board. To be safe, I put my old 2.6Ghz P4 in. However, after installing it and making minimal connections [both powers, proc and fan, memory, video, power switch], I have a new problem. Switching on the hard switch on the [Antec] Power Supply makes the little green 'have juice' button on the motherboard light up. However, hitting the power button does nothing; no reaction. Not even the fans react.
Yes, I've quadruple-checked that the power switch is on the right pins.
I'm tearing my hair out here. I've tried two different RAM chips [Corsair and Crucial; the Corsair was known good as of yesterday], re-seating the processor, tripple-checking the connections, two video cards. For some reason, I can't get anything to recieve power. I even tried the on-off switch from another case, to see if that was the issue.
Any ideas? Thanks a bunch in advance.
To make a long story short, I went out and got a new Intel D875PBZ board. To be safe, I put my old 2.6Ghz P4 in. However, after installing it and making minimal connections [both powers, proc and fan, memory, video, power switch], I have a new problem. Switching on the hard switch on the [Antec] Power Supply makes the little green 'have juice' button on the motherboard light up. However, hitting the power button does nothing; no reaction. Not even the fans react.
Yes, I've quadruple-checked that the power switch is on the right pins.
I'm tearing my hair out here. I've tried two different RAM chips [Corsair and Crucial; the Corsair was known good as of yesterday], re-seating the processor, tripple-checking the connections, two video cards. For some reason, I can't get anything to recieve power. I even tried the on-off switch from another case, to see if that was the issue.
Any ideas? Thanks a bunch in advance.