Intel Matrix RAID 0+1 dead...broken into two arrays...

csl3

n00b
Joined
Jan 28, 2009
Messages
1
Dear all,

I.........have two HDDs, running RAID 0 (name: Volumn0) + RAID 1 (name: Data) in Array_0000, as following

Array0000:
Volumn0 (RAID 0) - Normal
Data (RAID 1) - Normal

HDD-A 160GB (Member Disk 0,1)
HDD-B 160GB (Member Disk 0,1)

(1)Unplug a RAID HDD
(2)Replug a RAID HDD into another SATA cable....accidentally
(3)The Matrix RAID BIOS shows my RAID 0 & 1 are broken into two arrays(Array_0000 and Array_0001)....(see screenshot Data & Data:1 etc...). It is so weird.

intelmrxc8.jpg


In BIOS i can see
Volumn0 - degraded
Volumn0:1 - Failed 0_0
Data - Failed
Data:1 - Failed

HDD-A 160GB (Member Disk 0,1)
HDD-B 160GB (Member Disk 2,3)

How can I solve....someone said "reset" or "delete raid" in Ctrl+I and recreate array may succeed....but I dont have the brave to try unless you have some solid experiences...

Please share your thoughts...thanks a lot everyone i love you...
 
hello,
i think you can try recover raid0 volume from some backup (if you have any) and then raid1 will rebuild when your OS load. i have tried this situation.i have raid0 + raid1 on matrix ICH10R. i changed disk1 with same model empty disk, i recovered raid0 vol from backup (my OS vol with northon ghost) and then when loaded OS matrix manager started rebuilding of raid1 vol. everything was fine after rebuilding.
good luck!
 
Back
Top