Intel guys, I need your expertise on a E6700 setup

Dunan

[H]ard|Gawd
Joined
Aug 28, 2006
Messages
1,312
I have always used AMD but the E6700 is impressive for sure and was thinking of building a system around it.
I have an AMD x2 4400+ w/ddr3200 RAM crossfire rig, is there any benchmarks of these 2 cpu's going head to head?
What is a high performance crossfire board if they make one to use?
And what kind of RAM, if I could get some suggestions? 2gb
I'll only be replacing these 3 components.

It'll be easily into the $800 range and I want to make sure that i'm not just getting a few frames/sec in games or apps like photoshop, i'm hoping the difference will be worth it.

Thanks!
 
Reason why?
I dont like to OC, are they that close in performance?
 
Why don't you like to overclock? Its an easy way to boost performance monumentally.
 
xFlankerx said:
Why don't you like to overclock? Its an easy way to boost performance monumentally.
I dont want to have to come up with more cooling solutions and i always think i'll burn up my stuff :p
 
Just throw the FSB up to 300. That's all you'll need to do...

2.88ghz right like that...
 
Dunan said:
Reason why?
I dont like to OC, are they that close in performance?

You can EASILY take a e6600 and overclock it to e6700 performance with dam near guaranteed same stability, the better question is why blow $100?


I recommend updating your views on overclocking which may well be very outdated.

To keep this simple - Maufacturing techniques have improved exponentially over the last 10 years to a point where dam near all the processors run at there maximum ORIGINAL design speed.

The only reason why they are locked and sold at lower speeds is purely marketing, smoke and mirrors.

This is proven by the extremely high success rate on overclocking Core 2 Due and other modern processors (assuming the board can do it etc).
 
Get DDR2 800mhz PC2-6400 2X1GB ($200-$300)
Intel Core 2 Duo E6600 ($310) (You can easily run it @ 3ghz or 3.2ghz without doing much (don't even have to touch voltages or anything like that, it's just a matter of typing a single number in the bios)
Motherboard, Get anything Asus (975X Asus P5W-DH, P5WDG2 WS Pro, P5W64) ($250 - $300)

And spend $50 on a new CPU cooler. I recommend the Tuniq Tower 120

A little over $800, but those are high end components.
 
e6600 ------------$313
Asus P5W DH - $250
ddr2 800 -------- $235

Total $798.00

I have that same ram. Overclock it to 3Ghz ( 9 x 333), and you'll have better performance than the 2.93Ghz X6800.
You probably won't need to raise any of the voltages for that overclock,
which means its as safe as running everything at stock.
The only thing thats bad or dangerous is running mad voltage like 1.5v+ in to the CPU all the time.

conroe.gif
 
Nice legs :D

Thanks, i'll be looking into these suggestions - man those boards are pricey : :eek:
 
...but of course , do keep in mind that overclocking is essentially a crap shoot ..no gaurantees. Chances are good that you can take that e6600 to 3GHZ and beyond tho... but not gauranteed , especially at stock voltages.

just thought I'd throw some balance into the equation in your descision making process
:p

 
ThreeDee said:
...but of course , do keep in mind that overclocking is essentially a crap shoot ..no gaurantees. Chances are good that you can take that e6600 to 3GHZ and beyond tho... but not gauranteed , especially at stock voltages.

just thought I'd throw some balance into the equation in your descision making process
:p



Yeah, i'm not much of an overclocker, I doubt i'd be overclocking it anyways, I have enough things in my room generating heat as it is :D

Well the only thing holding me up right now is the board, man they are pricey!! :(
 
eno-on said:

Thats what motherboard I have with my e6600, and all is well.

BTW, first thing to do when you get everything set up is to flash to the newest BIOS (currently F7) Gigabyte has a windows based program to flash if you like.

I have mine overclocked to 3Ghz, when its idle or just basic websurfing, email, etc.. it stays at ambient (case) temperature about 30C. (95% of the time)

Under normal gaming load its like 40-50C.
For stresstesting with Orthos/Prime running for 4+ hours it gets up to about 59C. All of which is not hot, especially not considering the massive performance of it.
 
Had an e6400 on one of those, cpu pegged at 100%, 2.9ghz, never got over 48c on stock fan. It is cool here in Oregon, though.
 
back to your original question ..lol

..as far as games go , I dont think you will notice much improvement/per $ that its going to cost you to "upgrade"

Photoshop tho, you'd prolly see a noticeable difference in its performance ... but worth the $ ..that's for you to decide I guess.

I just switched from a opteron 170@2.5ghz with 2gb pc3200 on an A8N32-SLi Deluxe to an Asus P5DW DH Deluxe with 2gb of pc5400 and an e6600@2.93ghz (I got kind of a dud overclocker) and games I dont really notice much difference (and I dont play with benchmarks to see any exact numbers) ..but I mess with DVD's and encoding and all that with them is definately faster

..do I feel it was worth the $ for the switch ...not really, but I like to play with the latest and greatest so I am obviously not all about value :p

my advice to you would be to perhaps sit on your current rig for a few more months until 1st or 2nd quarter of next year and then start pricing stuff out ...unless of course your a hardware junkie like alot of us here at [H] are ..lol

 
ThreeDee said:
back to your original question ..lol

..as far as games go , I dont think you will notice much improvement/per $ that its going to cost you to "upgrade"

Photoshop tho, you'd prolly see a noticeable difference in its performance ... but worth the $ ..that's for you to decide I guess.

I just switched from a opteron 170@2.5ghz with 2gb pc3200 on an A8N32-SLi Deluxe to an Asus P5DW DH Deluxe with 2gb of pc5400 and an e6600@2.93ghz (I got kind of a dud overclocker) and games I dont really notice much difference (and I dont play with benchmarks to see any exact numbers) ..but I mess with DVD's and encoding and all that with them is definately faster

..do I feel it was worth the $ for the switch ...not really, but I like to play with the latest and greatest so I am obviously not all about value :p

my advice to you would be to perhaps sit on your current rig for a few more months until 1st or 2nd quarter of next year and then start pricing stuff out ...unless of course your a hardware junkie like alot of us here at [H] are ..lol



Yeah, I might stick to the current setup for a while longer :D

Reason I was wanting to change is that i'm working with PS much more than I did before, and also I got tomb raider legends and dark messiah and even in crossfire mode i'm only getting avg 25-40FPS with most of the eye candy on @1920x1200. I have to bump the res. down to 1600x1200 to get better frames.
Then when alan wake comes out......yikes :(
 
Dunan said:
Yeah, I might stick to the current setup for a while longer :D

Reason I was wanting to change is that i'm working with PS much more than I did before, and also I got tomb raider legends and dark messiah and even in crossfire mode i'm only getting avg 25-40FPS with most of the eye candy on @1920x1200. I have to bump the res. down to 1600x1200 to get better frames.
Then when alan wake comes out......yikes :(

I think your best bet might be to dump the crossfire and get the 8800gtx if gaming is more a priority ...or wait again for R600 and bump up that x2 +4400 and see what it can do in the overclock department @ stock voltages (or minimal increase to voltages anyways)

remember ...free performance increase is your friend

 
Back
Top