Hello,
My PQI (Intel X-25m with Intel firmware 8820) X-25m misses detection on cold boots rather frequently, always hangs at the BIOS IDE detection screen (very early in boot sequence), then reboots automatically after a few seconds, then will repeat process until it detects the drive and from then on things work fine. Seems to happen at cold boot rather then on warm restarts. My system is in my sig. Seems that Intel has admitted to Nforce MB IDE detection issues on MACS/OSX, but wonder if this issue affects me as well? P.S. Changing the channel the SDD is connected to (3 or 4) makes no difference, my Samsung HDD has always works flawlessly off the same controller. Note: SATA channel 1/2 cannot be used as they are not frequency locked when O/C'ing.
Any ideas?
RDP
My PQI (Intel X-25m with Intel firmware 8820) X-25m misses detection on cold boots rather frequently, always hangs at the BIOS IDE detection screen (very early in boot sequence), then reboots automatically after a few seconds, then will repeat process until it detects the drive and from then on things work fine. Seems to happen at cold boot rather then on warm restarts. My system is in my sig. Seems that Intel has admitted to Nforce MB IDE detection issues on MACS/OSX, but wonder if this issue affects me as well? P.S. Changing the channel the SDD is connected to (3 or 4) makes no difference, my Samsung HDD has always works flawlessly off the same controller. Note: SATA channel 1/2 cannot be used as they are not frequency locked when O/C'ing.
Any ideas?
RDP