• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Intel FPO/BATCH info?

  • Thread starter Deleted member 12106
  • Start date
D

Deleted member 12106

Guest
Where can I find some info?

I tried a forum search and a google search, I am sort of still confused as to this decoding from the number on the box.

My FPO/Batch# is 3726a783

Here is what I got from another forum....

1st letter or digit = plant code: (Malaysia)
0 = San Jose, Costa Rica
1 = Cavite, Philippines
3 = Costa Rica
6 = Chandler, Arizona
7 = Philippines
8 = Leixlip, Ireland
9 = Penang, Malaysia
L = Malaysia
Q = Malaysia
R = Manila, Philippines
Y = Leixlip, Ireland

2nd digit = Year of production: (2007)

3rd & 4th digits = week: (7th week )

5th - 8th digits= lot number: (723)

10th - 13th digits = serialization code (---)

If I am following this right-
My processor was made in Costa Rica.
Made 2007
Week 26
a783 lot number?

Does that seem right?

I am just making sure I am on the right page.

Going to start to push it and see what I can get from it, I am hoping for 3.2-3.4 on air.
 
Yah, you're on the right page, I believe. However, it doesn't really matter. Just start OC'ing it, lol. Which CPU is it?
 
Its an e6600. I got it at 3.2 right now, I am running OCCT and orthos. Been running for the last 7 hours.

When I get home from work today, I am going to try to bump it up a notch. I noticed my e6600, I can drop the multi on it, have not tried to raise it though to see if I could.
 
Multiplier can be set from 6 to 9 on an E6600. This is what gets adjusted when EIST is on.
 
Ah.

I got the EIST disabled in the bios.

I orthos/occt'd it for 18hrs at 3.2ghz, right now, its set at 3.4, getting ready to fire up orthos/occt for another round.
 
Personally, I only ORTHOS test for 15-20min at intermediate OC levels until I reach my desired speed. So, like for my E6750, I kept priming for only 15min until I reached 4Ghz... but it would crash at 4Ghz, so I dropped it down to 3.8Ghz and started testing there... once it was stable for 20min, I let it run overnight.
 
You must log in or register to reply here.
Back
Top