Intel FPO/BATCH info?

[Deleted member 12106]

Where can I find some info?

I tried a forum search and a google search, I am sort of still confused as to this decoding from the number on the box.

My FPO/Batch# is 3726a783

Here is what I got from another forum....

1st letter or digit = plant code: (Malaysia)
0 = San Jose, Costa Rica
1 = Cavite, Philippines
3 = Costa Rica
6 = Chandler, Arizona
7 = Philippines
8 = Leixlip, Ireland
9 = Penang, Malaysia
L = Malaysia
Q = Malaysia
R = Manila, Philippines
Y = Leixlip, Ireland

2nd digit = Year of production: (2007)

3rd & 4th digits = week: (7th week )

5th - 8th digits= lot number: (723)

10th - 13th digits = serialization code (---)

If I am following this right-
My processor was made in Costa Rica.
Made 2007
Week 26
a783 lot number?

Does that seem right?

I am just making sure I am on the right page.

Going to start to push it and see what I can get from it, I am hoping for 3.2-3.4 on air.

 

[engiNURD]

Yah, you're on the right page, I believe. However, it doesn't really matter. Just start OC'ing it, lol. Which CPU is it?

 

[Deleted member 12106]

Its an e6600. I got it at 3.2 right now, I am running OCCT and orthos. Been running for the last 7 hours.

When I get home from work today, I am going to try to bump it up a notch. I noticed my e6600, I can drop the multi on it, have not tried to raise it though to see if I could.

 

[engiNURD]

Multiplier can be set from 6 to 9 on an E6600. This is what gets adjusted when EIST is on.

 

[Deleted member 12106]

Ah.

I got the EIST disabled in the bios.

I orthos/occt'd it for 18hrs at 3.2ghz, right now, its set at 3.4, getting ready to fire up orthos/occt for another round.

 

[engiNURD]

Personally, I only ORTHOS test for 15-20min at intermediate OC levels until I reach my desired speed. So, like for my E6750, I kept priming for only 15min until I reached 4Ghz... but it would crash at 4Ghz, so I dropped it down to 3.8Ghz and started testing there... once it was stable for 20min, I let it run overnight.