Intel E7400 $80 at Microcenter

wow great price.

im gonna go pick one up in a few. gonna sell my e7200 on ebay for the same as the cost of this one.

hopefully i can get 4ghz+ with it.
 
Wow... I really need one of these. Wish I was near a Microcenter. I doubt the Dallas store will be in stock tomorrow when I go to big D.
 
im gonna go pick one up in a few. gonna sell my e7200 on ebay for the same as the cost of this one.


I have an E7200 also but I don't think it is worth it for me (even if I could get $80 on ebay)

mine does at least 3.6GHz on the stock HSF but it gets pretty warm. I would have to upgrade the HSF to get 4GHz. I decided to keep this computer as my budget/lower power draw setup and build an i7 or similar next year.

just wanted to let others know of this deal
 
Just got one. Obviously, there's a new stepping coming up named SLGW3 (R0, with Intel VT). The current stepping SLB9Y (also R0 but just) doesn't support VT. The newest one coming up in June 12 will support VT as well, which is the same as the E8xxx series, but just a little less cache.
 
Last edited:
whats your VID JCNiest?

I have a super low one on my e7200 (1.08v) so im a little worried if i go get one of these e7400's my vid will be in the 1.2's.
 
Last edited:
whats your VID JCNiest?

I have a super low one on my e7200 (1.08v) so im a little worried if i go get one of these e7200's my vid will be in the 1.2's.

I haven't installed it yet. Not sure if I want to keep it or sell it for a marginal profit. I will let you know when/if I decide to install mine and keep it.
 
The Vid on my e7200 is 1.2V, and it now naked (no IHS) and running at 4.0Ghz. Took a lot of Vtt to get it stable, and about 1.43V on the Vcore. It can go higher, but temps are a little scary, it really wants water :) Awesome chip!
 
[QUOTE="I'm not a crook";1034149637]The Vid on my e7200 is 1.2V, and it now naked (no IHS) and running at 4.0Ghz. Took a lot of Vtt to get it stable, and about 1.43V on the Vcore. It can go higher, but temps are a little scary, it really wants water :) Awesome chip![/QUOTE]

What's your batch#? Mine is: 3901A068
 
Q811A261 Way back people were saying that batch 'A' were a little better OC'ing, don't know it was true or not, but this chip is great. I also upgraded recently to a P45 board since the P35 couldn't OC too well with 8 gigs of ram loaded (memtest errors). I've got really cheap crucial ram (no heat spreaders, CL6 running CL5) and its amazing how well it performs!
 
Don't know why Intel changed the batch numbering recently. Used to be like QxxxAxxx or QxxxBxxx but now it's 39xxAxxx or 39xxBxxx. I'm gonna install mine and see how it performs.

Edit: Just realize that you were referring to a E7200, not E7400. Okay, the VID on my E7400 is 1.2875v
 
Last edited:
Okay, the VID on my E7400 is 1.2875v

damn thats pretty high for 45nm dual core. i wonder if 1.36v would be enough to get to 4ghz.

i went on Monday but I got there at 6:30pm and they closed at 6 because of memorial day and i didnt have time today. hmmm i dunno what to do.

like a $10 upgrade it would be for me but the VID is a little high for my goals.
 
well i went ahead and bought one today. havent installed it yet though but i should get around to it later tonight or tomorrow.

will post my batch # and VID later.
 
lol epic fail on my e7400.

stock vid was 1.2875 (vs my e7200's 1.08v)

e7400 took more volts to get to 3.8ghz, wouldn't stablize at 4ghz with even 1.42v. just a pathetic chip all around.

its already on ebay lol
 
What is the batch number?

lol epic fail on my e7400.

stock vid was 1.2875 (vs my e7200's 1.08v)

e7400 took more volts to get to 3.8ghz, wouldn't stablize at 4ghz with even 1.42v. just a pathetic chip all around.

its already on ebay lol
 
lol epic fail on my e7400.

stock vid was 1.2875 (vs my e7200's 1.08v)

e7400 took more volts to get to 3.8ghz, wouldn't stablize at 4ghz with even 1.42v. just a pathetic chip all around.

its already on ebay lol

Are the temp sensors stuck on yours, too? It does on mine. Pretty annoying...
 
batch # is 3851A203



Nah, mine seemed okay.

LOL I already sold it on ebay for a cool $30 profit.

I'm off to fedex to drop it off :D

Good riddance

So, you sold it for $100? Nice! What's the pack date on yours, if you remember?
 
So, you sold it for $100? Nice! What's the pack date on yours, if you remember?

sold it for $107 w/ free shipping :D

I don't remember the pack date and its already been shipped out. But regardless I wasn't happy with it at all. I hope you have better luck.
 
Mine is completely stable 4Ghz with 1.45v (in the BIOS) showing as 1.41v in OCCPT. Run 12 Hours of torture test. But as soon as I go to 4.2Ghz, it craps out right away. Temp is fluctuating between 58-63. 1.2Ghz increase in speed isn't too bad but it could always be better.
 
Thanks, I bit. Posting with it sitting right next to me. Haven't popped it in yet to check VID, will in the next couple days.
 
Batch 3846A601, Packed 2/19/09
Purchased in St. Davids, PA

Hope you have a better VID than mine (1.2875v). My max OC is 4Ghz (10x400). If I go 10.5x400, it craps out. If I go 10x410, it craps out on me.
 
Sold my first one, bought another one with a Batch# of Q850A452. Haven't installed it yet. I've got one with a S-spec: SLGQ8. Rumors are saying that of the two R0 (SLB9Y and SLGQ8), one is really a Wolfdale 6MB cache with half deactived while the other is just a true Wolfdale 3MB...but no one knows for sure which one is which.
 
Last edited:
Well, I installed this one and guess what? It's got two stuck temp sensors, too! Core 1 stuck @39c and core 2 stuck @35c. I just sold my Rampage Extreme X48 last night and shipped out earlier so now I have no way of OCing this latest one I got. At default, it's running 40-42 loaded at a default vcore of 1.25v (fluctuating 1.23-1.25). I put my True Copper on it, feels like it's going to crush the IHS.
 
Back
Top