Intel Burn Test, Tested My System Unstable

TekRok

2[H]4U
Joined
Dec 9, 2005
Messages
2,279
Hey guys i have a couple questions here.

I recently ran an intel burn test on my OCd 920 which was at 3.8GHz, 1600 RAM speeds, memory voltage set to 1.64v and everything else left stock. I ran the system before the test for about a month or so, NEVER any crashes during gaming, or running many many apps.

When i ran the test 9 out of the 10 runs that i specified were spot on, no irregularity but the last one was rather different which tested unstable. I am wondering if this is something i should be worried about, how accurate is it exactly? I ask because i have read instances where people ran their stock 920s speeds and they tested unstable.

My temps are good with the Noctua, idle around 44 when it gets warm in the room at 3.8, liked the speed as well.

Should i maybe bring my voltage up? To what number exactly as it is stock right now? Or bump up any other setting perhaps?

Thanks
 
What are load temps, idle temps not only do not matter, but at idle I am pretty sure the temp readings aren't as accurate.

But I would say if it finishes IBT w/o crashing even if it tells you it may not be stable it is probably fine. If it can pass many hours of Prime95 then you are fine, because other than linpack tests, nothing will stress it more than p95.
 
On my P6T Deluxe V2 I needed to raise the ram voltage to 1.66v to get 4ghz and higher range, I tried 1.64v and it wouldn't go past 3.6ghz stable with IBT. Not sure what your Gskills can handle but you might want to see if your ram voltage can go higher than that.
 
Load temps were 93C with 3.8GHz OC, in the 76s with 3.6

Why raise the memory voltage, wouldnt the issue be related to the CPU overclock itself? Since i am running stock speeds of the RAM at 1600 at 3.8GHz is it really needed to raise the voltage?
 
YMMV but not all 920s have good overclocking results. 93C is really hot for a 3.8ghz overclock, usually its considered bad to pass the 80C temp threshold. If you have a 920 D0 stepping you shouldn't have any problem reaching 4ghz at 1.25 Vcore.

I thought it was the CPU voltage when I ran my rig originally at 1.64v dimm voltage with a 4ghz overclock but once I upgraded to the newest bios for the motherboard, I could no longer achieve the 1.64v dimm voltage for a 4ghz overclock anymore. I took a chance and went to 1.66v on my ram, and IBT passed. Its weird I know.

You might want to see my thread on my overclocking experiences on the 920 http://www.hardforum.com/showthread.php?t=1425313
 
Last edited:
well 93 Degree temps is when I ran the IBT, my highest temps when CPU is at load when i play games and etc usually doesn't pass 70

Do you activate all 8 threads when you run the test or select auto? And which setting do you select, high, highest? I ran mine on high
 
Have you tried adjusting your Uncore spd?
What's the highest BCLK you can run (crank your multi all the way down)?
 
Back
Top