• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Installing Tec on R120

You'll need... A TEC rated for 2x the output power of your CPU (a conroe at 3ghz should use around a 250w TEC). Make sure to get a "potted" tec to prevent lots of condensation INSIDE the TEC. Make sure the TEC is the same size as the waterblock.

You'll also need a block of copper the same size as the base of the waterblock... It should be 2-3mm thick.

Thermally epoxy the HOT side of the TEC to the waterblock and epoxy the copper block to the cold side.

Lots and LOTS of insulation and use either a dielectric grease, or a conformal coating on the board to prevent your board from frying.

You'll probably need another radiator to handle the heat of a TEC though ^o)
 
Arcygenical said:
You'll need... A TEC rated for 2x the output power of your CPU (a conroe at 3ghz should use around a 250w TEC). Make sure to get a "potted" tec to prevent lots of condensation INSIDE the TEC. Make sure the TEC is the same size as the waterblock.

You'll also need a block of copper the same size as the base of the waterblock... It should be 2-3mm thick.

Thermally epoxy the HOT side of the TEC to the waterblock and epoxy the copper block to the cold side.

Lots and LOTS of insulation and use either a dielectric grease, or a conformal coating on the board to prevent your board from frying.

You'll probably need another radiator to handle the heat of a TEC though ^o)
Click to expand...

i stared at this for a good 30 secs before i understood it.

WHAT? :eek: . Yea, I'll have a pro do this for me. LOL! ;)
 
Please be advised that you will void the warranty on your motherboard by using a TEC, as you'll need to spray something on it to prevent condensation.
 
continue with explaination... what kind of coating should I use? I had my homemade tec water chiller to 0c idle last night with nothing on my board at all.... so this concerns me.
 
You must log in or register to reply here.
Back
Top