installing second harddirve... help.. plz..

wubbie412

Limp Gawd
Joined
Jan 3, 2007
Messages
158
hey guys! i have a question again. How do you install your second SATA hard drive?

After you plug it in bascillay... do i hav to set it up in setup (by pressing delete)
or can i do it after window reboots through control panel?

can you guy plz giv me step by step instruction? cuz i already tried n messed up n my window xp got erased... sigh.. i lost everything... lmao... im laughing but at that moment.. i swear i wanted to cry.... sigh..
 
To install a second SATA drive I would start by going into BIOS (usually by pressing Delete as was noted) and making sure the motherboard is set up to detect another drive or not. My old Dell had to have it done manually, but it seems the motherboard in this PC doesn't need that, but I could be wrong.

Secondly, once into windows the second hard drive needs to be formatted. To do this right click on the my computer icon and select manage. In the window that comes up select storage > Disk Management > then format your drive from there.

NOTE: the formatting can also be done by going into the administrative tools in Control Panel.
 
You will need to initialize the disk and create a new partition before you can format it.

In the disk management applet, right click the disk device (the thing to the left of the "bar graphs") and click "Initialize".

Then right click the bar-graph looking thing on the new disk and click "Create new partition" or something like that. It will walk you through it.

After that, right-click on it again and hit "Format...". Again, it will walk you through it.
 
thanks =)

but... where do u partition it?

so partition it first? then right click on my computer.. etc etc?

which is first?
 
It is not possible to format a hard drive without a partition on it. Do the right click on my computer and the partition tools will be in there as well.
 
Like a previous poster said, install the HD and go into the BIOS to make sure it is recognized.


Get into windows and right click on my computer and go to manage.

Once that is open go to disk management.

You will see things on the bottom left hand of the window, and you will see a disk that has a black top boarder. Go to the far left of that, and right click on the grey box that says Diskx, where x is the number of the new drive (probably 1).

Right click and initialize, then right click on the bar to the right of that gray box, and setup a partition/format.

Enjoy.
 
Back
Top