Installing Radeon 9600 SE on IC7-MAX3 question

gooer

n00b
Joined
Jul 26, 2004
Messages
2
This is probably a stupid question, but its my first time building a PC:

I bought an Abit IC7-MAX3 which lacks a built in video card. I install the video card (ATI Radeon 9600 SE) and plug in the monitor cord, but get no signal. The manual says to "install the latest drivers" to fix this problem, but how am I supposed to do that if I can't see anything? In order to see the driver installation, I need a videocard, in order to use the video card I need to install the drivers. Am I missing something?
 
first off sad to admit that i have a 9600se in one of my servers. i have put this card in one of my machines that has an ic7max3 to benchmark this card and had no problems wiht the card. sounds to me like your card may be bad. or the board might be bad. i would take the card out try and reseat it and take some canned air and blow out any dust in the agp port.

if you dont see any thing while booting up to even get into the bios. its not a driver problem.

does the card work in anohter computer? does another video card work in the mother board?
 
Actually I thought it might be a problem with the video card, so I went to the store and exchanged it, so I'm pretty sure the 9600 is good. However, it is interesting that you bring up that it might be the motherboard. When I plug it in the mobo, it turns on (lights, fans, etc.) but only stays on for a minute or two before powering off.

I don't have another AGP oriented video card (my other computers are old as crap), but none of the PCI cards I try power on.

I'm gonna try blowing out the AGP slot ASAP, and I'm gonna hope whatevers wrong with the board is covered under warranty.
 
if its shutting right off after power turn on could be couple of different things.

is the HSF monuted correclty? all your motherboard screws tightented down? any think metal or such touching the mother board?
 
Back
Top