Installing new mobo - same HD

saqdeez

Limp Gawd
Joined
Apr 23, 2003
Messages
208
I installed the mobo but am using the same HD (not trying to reformat) because the old mobo died on me, no virus or anything.

I didnt change any settings, but it recognizes my CPU as 1.2 ghz where it should be 2.2 or arond there (athlon 2800)

It boots up into windows, but the mouse and keyboard freeze 20 seconds after the desktop appears. At the same time my watchdog program asks me do i want to allow a new startup process, which i think is the motherboards doing, something about clear -XXX.


So i cannot get around this. Any recommendations on how to make it boot ok? I think it is getting confused by the new motherboard while it still thinks it is the old one.

Old mobo is biostar m7ncdpro, new one is shuttle an35(n) ultra, windows xp..
 
I would suggest getting into the Device manager and basically dumping everything that was related to your old board, as it sounds like you're running into conflicts. My only other suggestion would be to do a format/reinstall.... Sorry
 
It's best to reformat after installing a new motherboard. There are new address ranges, motherboard resources, etc that the system can't cope with without a new installation.
 
I've always just done the Windows Repair utility on the CD. Boot from the CD, tell it to repair Windows. Doesn't affect user settings, user files, etc. Just configures Windows to the present hardware.

Done it many times with no problems. :)

edit: It seems to be a re-install of Windows over the old one, which makes sense. Go to the Install option when booting from the cd, and the Repair option should be there.
 
- take the hard drive out.
- set it as a slave/cable select
- bring it to another pc and hook it up
- back up the files you need to the master HD
- take ur HD back to ur new mobo
- FORMAT it and install windows
- get ur files back from other pc by network or take ur hard drive out agian and setting it as slave on the machine with ur data
- OR once the data is on the other machine burn the data onto CDs
 
Back
Top