• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

installing a pump?

Using nylon (or some other plastic) barbs would probably prevent crackin the housing. I have also heard that it's a good idea to silicone the housing seal where the O-ring sits right off the bat, because they often leak. My friend had one of these pumps and suffered both problems- he first used a brass barb and it leaked, then the O-ring leaked.
 
Originally posted by OneMadPoptart
Screwing in ANY barb too much will make the housing crack.
Click to expand...

true - but a male brass npt going into plastic female threads makes that h311a easy to do. it usually doesn't even feel like you are exerting much pressure and then you hear CRACK!

in my experience with the danners, the plastic on the impeller housing is rather brittle. I'd stick with nylon fittings on that one unless you have some experience with using brass on plastic.
 
You must log in or register to reply here.
Back
Top