Installed new heatsink, Now no post

fantomau

2[H]4U
Joined
Aug 25, 2007
Messages
3,367
I just installed a Zalman 9700 HS, Was very careful installing, All connections are secure and tight, But now my system wont even boot up, No video, Not even any beeps from the speakers.

On initual boot, It will stay on for a few seconds and then shut off, Then reboot and nothing. The HS fan is working.


Mobo is a Asus P5Q Deluxe with a E8400 CPU.
 
It got mad at you for taking the xigmatek away. :p

Anyhow, yah, it sounds like something may be grounding out the system. Pull it out of the case and onto a cardboard box, and re-seat the Zalman.
 
I took out the mobo and placed it on mobo box, plugged everything up and still nothing. Took off video card, nothing, took off ram, nothing. I even installed the stock cooler.

Edit: Looking at the cpu slot, It appears theres 2 pins that are bent inwards, Would that cause this?. Of all the times I've built systems, I've never bent any pins. I dont dare mess with those.

img04552cf1.jpg
 
Improper seating of the CPU would cause that.

No worries, find a straight pin and pop those out. If you can't do that, then sorry dude.
 
Asus said they'd repair it for $40? flat fee? like even if you try to fix it, unsuccessfully, its (hopefully) still just those two pins that are damaged, and the repair price will still be the same, right? If so, I'd attempt an amateur fix first. :p At such a high price, it sounds like they're just going to replace the whole thing anyways.
 
Reset the BIOS, then take out the battery for awhile.

Put the battery back in, reset the BIOS again, and see if if will POST with just RAM/CPU.
 
Reset the BIOS, then take out the battery for awhile.

Put the battery back in, reset the BIOS again, and see if if will POST with just RAM/CPU.

Way ahead of ya, I did that, Left the battery out for awhile, reset bios, booted up w. cpu and ram, cpu only, no beeps, no nothing.
 
Back
Top