Innovation@Intel: Materials for EUV Lithography

HardOCP News

[H] News
Joined
Dec 31, 1969
Messages
0
One of the key challenges to successful EUV lithography is the choice of photoresist (aka "resist"), the material used to create a specific pattern on a layer of a chip. The resist must be sensitive to EUV radiation so a pattern can be created, and must resist subsequent etching or other processing steps. Intel has been evaluating various materials for this purpose on an in-house Micro-Exposure Tool. The goal is to simultaneously achieve high sensitivity, high resolution, and low line width roughness (LWR). Intel has demonstrated that a positive-tone chemically amplified resist coupled with an EUV underlayer as well as the use of an ancillary post-develop rinse material can achieve 22nm half pitch resolution while meeting sensitivity and LWR requirements.
 
I cannot wait until CPU's are based off this process. Seriously even if intel just took the current line of corei7's and shrunk them down to 22nm They would be able to have 4.5-5Ghz clock speeds. And have the same power envelope. too bad they are into having as many cores as possible rather than raw performance. We have to wait for the software to catch up to the hardware. And BallerX, loving your comment!
 
Back
Top