Initial Startup after Rebuild??

reubenray

Weaksauce
Joined
Jul 9, 2007
Messages
66
I have ordered a new PSU, motherboard, CPU, memory and video card. I will keep my current 200gb hard drive and CD-Rom drive. After I get everything connected and ready to fire up for the first time I do not know what to do. I have my old XP disk and I assume I will have numerous install disks for the new hardware.

What has to take place first? I have come across several website showing how to install everything, but nothing on the actual start-up procedures.

ps: I had this posted at the HTPC Forum, but felt it may be more responses here. Sorry if this is a forum no-no.
 
just put the windows cd in and let it run it should guide you the rest of the way.
 
OK - so I will not get multiple "found new hardware" notices all at the same time?

Here is another question concerning my hard drive. I currently have an 80gb and a 200gb ide hard drives. I was going to only hook up one of the for the initial startup (add the other one later).

Which would you recommend the 80gb or 200gb? At some point later I will be getting a Sata hard drive also.
 
Oh, you will. Install the chipset drivers first, then your video, then your audio, and finally your nic. Be sure your not connected to the internet while installing windows. Are you planning on using the same OS install or reformatting and starting fresh?

If you want to use the same OS installation, you'll have to repair the install (In windows setup, proceed to INSTALL the OS, and it should detect the "old" installation and ).

If you want to reformat (which I recommend you do), make sure you save all your data onto another partition or the other drive, whichever is easier.

Do a speed test on the drives with HDTune, and use the faster one for now, lol. Why not go SATA now? They're rather cheap... I just picked up a $60 300GB 'cuda, hehe.
 
Oh, you will. Install the chipset drivers first, then your video, then your audio, and finally your nic. Be sure your not connected to the internet while installing windows. Are you planning on using the same OS install or reformatting and starting fresh?
Starting fresh - new hardware so new OS

If you want to use the same OS installation, you'll have to repair the install (In windows setup, proceed to INSTALL the OS, and it should detect the "old" installation and ).

If you want to reformat (which I recommend you do), make sure you save all your data onto another partition or the other drive, whichever is easier.
Nothing important is there

Do a speed test on the drives with HDTune, and use the faster one for now, lol. Why not go SATA now? They're rather cheap... I just picked up a $60 300GB 'cuda, hehe.
I did not want to waste what I have already. I will run HDTunes to see what is fastest. Hopefully the 200gb one is being it is the newest.
 
I did not want to waste what I have already. I will run HDTunes to see what is fastest. Hopefully the 200gb one is being it is the newest.

I see... yah, I just use my old IDE drive as an external HDD, so it doesnt go to waste. :D
 
Back
Top